位置：成果数据库 > 期刊 > 期刊详情页
Formation and Control of Cutting Vibration in High-speed Machining.
  • ISSN号：0255-5476
  • 期刊名称：Materials Science Forum
  • 时间：2013
  • 页码：62-66
  • 相关项目：微细切削加工中毛刺形成机理及控制技术研究
作者： 陈建|宋志鹏|王贵成|
同期刊论文项目
微细切削加工中毛刺形成机理及控制技术研究
期刊论文 47 专利 8
同项目期刊论文
Measurement Method of HSK Tool Holder's Unbalance in HSM
金属切削毛刺预报研究现状分析
Application and Analysis of RBF Neural Network for Burr Prediction in Micro-Machining
齿面摩擦下非对称齿轮接触疲劳强度的计算
Modal Experiment and Analysis of HSK Tool-holder and Thin-disk Cutter
Modeling Analysis of Micro-Burr Formation
Application of Biodegradable Cutting Fluids in High Speed Turning
Thermal Stress Simulation of the Surface Grinding
基于多变量灰色模型的磨削参数预测研究
Finite element analysis of burr formation in micro-machining
Active Control Methods of Cutting Burr in Precision and Ultra-precision
Characteristic of Residual Stress Distributions at Workpiece Surface in
Analysis and Simulation of BIG-PLUS System.
Automatic Control Technology of Grinding Zone Temperature in Grinding Hardening.
High Speed Machining and Motion Simulating of Indexing Mechanism with Globoidal Cam
MQL Application in Vibration Tapping
Equivalent Conversion Calculation of Straight Bevel Gear’s Mesh Stiffness.
Analysis of Vibration Signals Caused by Unbalance of the HSK Shank.
The Development and Application of expert system about metal cutting burr based on neural network
Thermal Fatigue Analysis of HSK Shrink Toolholder
The Design of Indexable Gear Insert and Cutting Parameter Optimization
The cutting residual stress included in the surface integrity
Study on the Thermal Contact Zone in the Surface Grinding
Study on Residual Stress Distribution in Surface Grinding
Study on the Performance of Braze Cemented Carbide Cutting Tool
The Heat Performance Analysis of HSK Shrink Toolholder
Application of Castor Oil-based Cutting Fluids in Precision Turning
基于齿面摩擦的非对称齿轮支座反力分析
Application of Taguchi Method in Vibration Tapping Process
Characterization Method and Evaluation System of Surface Integrity
考虑齿面摩擦影响的非对称齿轮齿根弯曲应力计算
Formation of Cutting Direction Burr/Fracture in Orthogonal Cutting
Effect of Flow Field on Cutting Fluid Penetration during Minimum Quantity Lubrication (MQL) Machinin
高速HSK热装工具系统结合部的参数辨识
结合部对HSK主轴系统动态特性的影响
42CrMo钢磨削淬硬加工中磨削力的研究
高速液压夹头结构的优化设计
HSK热缩刀柄一刀具失效分析
MQL外圆车削数值模拟及流场分析
HSK刀柄不平衡量的测量
大进给复合振动攻丝切削速度及后退量的优化研究
原始组织对42CrMo钢磨削淬硬层的影响
最小量润滑的车削数值模拟及流场分析
切削参数对微铣毛刺尺寸影响的试验研究
智能加工技术研究进展与关键技术
微细切削毛刺的有限元仿真