欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
采用全光纤主振荡功率放大（MOPA）结构皮秒脉冲激光器作为抽运源，搭建同步抽运光参量振荡器（OPO），实现了中红外波段的皮秒脉冲激光输出。光纤激光器输出脉冲重复频率为52MHz，脉宽约20ps，中心波长1064nm。使用一块长50mm、极化光栅周期为30．5μm的周期极化掺镁铌酸锂（PPMgLN）作为非线性频率转换晶体，采用信号光单谐振腔结构，在抽运功率5．2w时获得了平均功率为0．67W的闲频光输出，中红外参量转换效率为12．9％，斜率效率达14．5%。通过改变晶体温度的方式实现了输出波长在1．544～1．608μm（信号光）和3．15～3．42μm（闲频光）范围内的调谐。从腔长同步匹配的角度讨论了该OPO系统的输出稳定性。
英文摘要：
A picosecond mid-infrared optical parametric oscillator （OPO） synchronously pumped by an Yb-doped fiber laser is reported. The OPO is pumped by an all fiber master oscillator power amplifier （MOPA） centered at 1064 nm picosecond pulses with duration of 20 ps at a repetition rate of 52 MHz. A 50 mm periodically poled MgO-doped LiNbO3 （PPMgLN） with a poled grating period of 30.5μm is used as the nonlinear crystal and a single resonant cavity is adopted. At room temperature, 0. 67 W average idler power is obtained at pump power of 5. 2 W with the conversion efficiency from pump to idler being 12.9% and the slope efficiency being 14.5%. By controlling the temperature of PPMgLN crystal, the wavelength tuning range can cover 1. 544--1. 608 μm （singal） and 3.15～3.43μm （idler）. Additionally, the stability of this OPO system is discussed.
同期刊论文项目
同项目期刊论文
Flat Supercontinuum Generation Covering C-band to U-band in Two-Stage Er/Yb Co-Doped Double-Clad Fib
Experimental investigation on amplification and coherence properties of a single-frequency and dual-
Temperature sensing using the bandgap-like effect in a selectively liquid-filled photonic crystal fi
Recent developments in high power near-infrared super-continuum generation based on photonic crystal
Fusion splicing small-core photonic crystal fibers and single-mode fibers by controlled air hole col
Visible supercontinuum generation in tapered photonic crystal fiber pumped by picosecond pulse at 10
Temperature sensor based on surface plasmon resonance within selectively coated photonic crystal fib
Near-infrared supercontinuum generation in an all-normal dispersion MOPA configuration above one hun
General principles for designing mode converters based on air-hole collapse in photanic crystal fibe
Low-Loss Fusion Splicing Photonic Crystal Fibers and Double Cladding Fibers by Controlled Hole Colla
期刊信息
位置：