中文摘要：

采用包混工艺合成核-壳结构的硅-树脂先驱体粉体,引入Al2O3-SiO2-Y2O3复合添加剂,通过成型、炭化和烧结工艺制备多孔碳化硅陶瓷。分析多孔碳化硅陶瓷样品的物相、形貌、孔隙率、热导率、热膨胀系数和抗热震性能。结果表明：复合添加能够在较低的温度下制得多孔碳化硅陶瓷;陶瓷样品的晶粒较小,明显增强了多孔碳化硅陶瓷的导热性能;复合添加提高了碳化硅陶瓷的抗热震性能,添加Al2O3-SiO2-Y2O3并且在1650℃下烧结制备的多孔碳化硅陶瓷经过30次热震后的抗弯强度损失率为6.5%;陶瓷样品的孔壁更加光滑,孔分布更均匀;复合添加对多孔碳化硅陶瓷热膨胀系数的影响较小。

英文摘要：

The core-shell structure silicon-resin precursor powders were synthesized through coat-mix process and addition of Al2O3-SiO2-Y2O3 composite additives.A series of porous silicon carbide ceramics were produced after molding,carbonization and sintering.The phase,morphology,porosity,thermal conductivity,thermal expansion coefficient,and thermal shock resistance were analyzed.The results show that porous silicon carbide ceramics can be produced at low temperature.The grain size of porous silicon carbide ceramic is small,and the thermal conductivity is enhanced significantly.Composite additives also improve the thermal shock resistance of porous ceramics.The bending strength loss rate after 30 times of thermal shock test of the porous ceramics which were added Al2O3-SiO2-Y2O3 and sintered at 1 650 ℃ is only 6.5%.Moreover,the pore inside of the sample is smooth,and the pore size distribution is uniform.Composite additives make little effect on the thermal expansion coefficient of the porous silicon carbide ceramics.