采用溶胶凝胶方法制备Sm掺杂CeO2粉体材料,用放电等离子烧结(SPS)方法和常规烧结方法(CS)进行压片烧制。比较两种烧结方法对材料结构与性能的影响。通过X-射线衍射(XRD)、场发射扫描电镜(FE-SEM)等手段对氧化物进行结构表征,交流阻抗谱测试电性能。结果表明,两种烧结方法所得样品均呈现单一的立方莹石结构;SPS烧结样品的晶粒尺寸和密度大干CS烧结样品,SPS烧结样品的晶粒电导率、晶界电导率及总电导率均高于CS烧结样品;550℃时SPS和CS烧结样品的总电导率分别为2.27s/m和1.87s/m。放电等离子烧结法是在较低温度下实现快速烧结,制备致密化固体电解质材料的一种有效方法。
The Sm doped CeO2 powder material prepared with sol and gel, is sintered with Spark plasma sintering (SPS) and conventional sintered (CS) respectively to compare the differences of the two methods. The structures and ionic conductivities are characterized with X-ray Diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and electrochemical impedance spectroscopy (EIS). Tbe results show that all the materials are single-phase with a cubic fluorite structure; the grain size and density of the SPS samples are larger than those of CS sample while the grain, edge and over-all conductivities of SPS sample are larger than that of CS samples. At 550 ℃, the over-all conductivity of SPS and CS is 2.27 s/m and 1.87 s/m respective. It can be concluded that SPS is more effective, which can be used at low temperature to prepare the densification solid electrolytes.