位置：成果数据库 > 期刊 > 期刊详情页
New Analysis Theory and Method for Drag and Torque Based on Full-Hole System Dynamics in Highly Devi
  • ISSN号：1563-5147
  • 期刊名称：Mathematical Problems in Engineering
  • 时间：2015.12.2
  • 页码：-
  • 相关项目：油气井管柱力学与井下工具
作者： Xiaohua Zhu|Bo Li|Qingyou Liu|
同期刊论文项目
油气井管柱力学与井下工具
期刊论文 51 获奖 30 专利 1 著作 1
同项目期刊论文
定向穿越导向孔钻柱系统非线性屈曲仿真研究
拉弯复合载荷作用下的API短圆套管螺纹力学行为研究
高频扭转冲击钻进的减振与提速机理研究
Research on a probabilistic assessment method based on defective casing safety evaluation criteria i
Effects of the Difference Between the Static and the Kinetic Friction Coefficients on a Drill String
On the formation of limit cycle of the friction-induced stick-slip vibration in oilwell drillstring
复杂结构井磨损套管连接螺纹的三维力学行为
双头单螺杆泵定转子啮合转动仿真研究
螺杆钻具多列推力轴承力学及运动特性分析
基于钻头破岩钻进的下部钻具横向振动特性研究
Analysis of reamer failure based on vibration analysis of the rock breaking in horizontal directiona
The mechanism and law of wellbore instability due to drill string impact in air drilling
Effects of high-frequency torsional impact on rock drilling
Development of a high-frequency torsional impact generator for improving drilling efficiency
A Literature Review Of Approaches For Stick-Slip Vibration Suppression In Oilwell Drillstring
Research regarding coal-bed wellbore stability based on a discrete element model
Equations to calculate collapse strength of defective casing for steam injection wells
Drill string failure analysis and erosion wear study at key point for gas drilling
水平井防托压工具安全性评价与试验
尾管悬挂固井中钻杆接头伸长量计算模型建立
PDC切削齿破岩效率数值模拟研究
Distrubution features of cuttings bed and sensitivity analysis of major drilling parameters on cutti
3D mechanical modeling of soil orthogonal cutting under a single reamer cutter based on Drucker-Prag
减振器对井下钻具振动特性的影响分析
Study of the influences of rotary table speed on stick-slip vibration of the drilling system
Application of Multiphysics Coupling FEM on Open Wellbore Shrinkage and Casing Remaining Strength in
Failure analysis and solution studies on drill pipe thread gluing at the exit side of horizontal dir
Improving the drilling performance of hole-enlargement via optimized operation
Kinematics and Mechanical Properties Analyses on Vibration Converter of Intelligent Damper for Drill
Research on a probabilistic assessment criterion of casing deformation in an incomplete borehole in
A new method to predict the remaining life of corrosion casing for steam injection wells
Optimizing loading path and die linetype of large length-to-diameter ratio metal stator screw lining
定向穿越导向孔钻柱系统非线性屈曲仿真分析
超深井生产测试用连续管的安全性评价
切削热对双台肩螺纹加工精度与连接强度影响研究
热孔弹塑性完全耦合作用下的井底岩石应力分布
水平井段脉冲携岩数值模拟研究
定向穿越用超大规格螺杆钻具的研制与试验
基于岩石性能试验的冲旋钻井钻齿破岩仿真