中文摘要：

利用滚对平板（RTP）紫外纳米压印工艺在聚合物薄膜表面成功制备出大面积蛾眼纳米结构。通过原子力显微镜观测,可以看出蛾眼纳米结构在聚合物表面排布比较规整,呈乳状凸起阵列排布。蛾眼结构波峰高度复制率可以达到95.2%,表面微结构填充完整,复制效果良好。与单层镀膜（AR-coating）抗反射材料相比,抗反射蛾眼结构反射率测试结果在可见光波段（380~760nm）反射率平均降到3%。视角在110°左右可见光平均反射率为7%。

英文摘要：

Large size moth-eye nanostructures were successfully prepared on the surface of the polymer films by roll-to-plate （RTP） UV nano-imprint lithography. By atomic force microscopy （AFM）, it is shown that the moth- eye nanostructure on the surface of polymer is more regular, with milky bulges arranged in arrays. The replication rate of the wave height to the moth-eye nanostructure could reach 95.2 %. The microstructure from the surface is filled completely and effectively. Compared with the single coating （AR-coating）, the reflectance test results of the moth-eye nanostructure are reduced to 3% in the visible light range （380-760 nm）. The average reflectance of visible light at 110° is 7%.