位置：成果数据库 > 期刊 > 期刊详情页
含镍TRIP钢的组织与力学性能研究
  • ISSN号：1001-7208
  • 期刊名称：《上海金属》
  • 时间：0
  • 分类：TG146.21[金属学及工艺—金属材料;一般工业技术—材料科学与工程;金属学及工艺—金属学]
  • 作者机构：[1]上海大学材料科学与工程学院,上海200072
  • 相关基金：国家重点基础研究和开发项目（No.50934011）和国家自然科学基金（No.50971137）
作者： 吴其浩[1], 朱娜琼[1], 何燕霖[1], 李麟[1]
关键词： 镍, TRIP钢, 热力学软件, 显微组织, 力学性能, Ni, TRIP Steel, Thermo-Calc Software, Microstructure, Mechanical Properties
中文摘要：

采用Thermo—Calc热力学计算软件、Gleeble-3500热模拟试验机、x射线衍射仪等研究了两相区（780—820Qc）等温处理对含镍TRIP钢组织和力学性能的影响。结果表明，Thermo—Calc软件的计算结果和试验结果符合较好。该成分的试验钢具有较好的力学稳定性，经过不同的热处理工艺，均能达到比较理想的强韧性配合，抗拉强度达到1000MPa，延伸率达到20％以上，其中强塑积最大值达到24036MPa％。

英文摘要：

Effects of intercritical annealing on the microstructure and mechanical properties of TRIP steels containing Ni were studied by means of Thermo-Calc software, Gleeble-3500 thermal simulator, X-ray diffraction and so on. The results showed that the calculated data by Thermo-Calc software was well in accord with the experimental results. The TRIP steels with such composition possessed a great stability of mechanical properties. With different heat treatments, all the TRIP steels obtained ideal properties, which the tensile strength was 1 000 MPa and the elongation was more than 20%, and the best strength and ductility product was 24 036 MPa%.

同期刊论文项目
双相不锈钢中σ相析出行为的相图热力学和动力学
期刊论文 43
先进高强钢在高速变形条件下的行为规律及热力学动力学机制
期刊论文 61 会议论文 11 获奖 4 专利 2
同项目期刊论文
Si-Mn系低碳钢经不同热处理后动静态性能的对比研究
不同轧前保温温度对低碳钢热轧组织与性能的影响
低硅无铝中碳TRIP钢中残留奥氏体的机械稳定性
STUDY OF Mn AND P SOLUTE DISTRIBUTIONS AND THEIR EFFECT ON THE TENSILE BEHAVIOR IN ULTRA LOW CARBON
开轧温度对含铌微合金钢粗轧后析出相影响的模拟
Experimental study and kinetic calculation on migration of γ/α interface boundary during
高温时效2205双相不锈钢中的组织转变
高温时效对2205双相不锈钢中σ相析出行为的影响
Experimental and computational study on microstructural evolution in 2205 duplex stainless steel dur
外加磁场对纯金属比热影响的实验研究与计算
Fe-Al-Si三元扩散偶中合金元素扩散行为的动力学计算
Si-Mn系低碳钢经DP和TRIP处理后组织与性能的对比性研究
高锰钢中的TRIP和TWIP效应以及层错能研究
Computer Simulation of Fe-Al-Si System Diffusion Couples
Modeling of Nucleation and Growth of M23C6 Carbide in Multi-component Fe-based Alloy
Coarsening of M23C6 Precipitates in an Fe-Cr-C Ternary Alloy
Effect of Overaging on Solute Distributions and Bake Hardening Phenomenon in Bake Hardening Steels
Effect of heat treatment on microstructure and mechanical properties of TRIP steel sheets containing
DESIGN AND INVESTIGATION ON THE HOT ROLLING TWIP STEEL WITH TRIP EFFECT
Hot dip galvanizing behavior of advanced high strength steel
0.15C-0.14Si-0.2Mn-0.04Nb钢的静态再结晶行为研究
应用有限元模拟研究退火温度对超低碳烘烤硬化钢力学性能的影响
热冲压成形技术及其新进展
Influence of Soaking Temperature on Microstructure of Multi-pass Compression Deformation for Low Carbon Steels
Application of thermodynamics in designing of advanced automotive steels
Si-Mn系低碳钢经不同热处理后动静态性能的对比研究
Technology for high performance TRIP steel
challenges in hot-dip galvanizing of high strength dual phase steel: surface selective oxidation and
CALPHAD modeling of molar volume
Thermodynamic Assessment of the In-Ni-Sb System and Predictions for Thermally Stable Contacts to InS
Study of stretch bendability and shear fracture of 800MPa dual phase steel sheet
Fe-C-Mn-Si 系合金马氏体转变开始温度的热力学计算
influence of soaking temperature on microstructure of multi-pass compression deformation for low car
低硅无碳中碳TRIP钢中残留奥氏体的机械稳定性
铁铬碳合金碳化物高温时效中粗化行为研究
18Mn-Si系TWIP钢层错能的计算与实验
富Cr碳化物析出行为的热力学与动力学计算
外加磁场对纯金属比热影响的实验研究与计算
Fe-Al-Si三元扩散偶中合金元素扩散行为的动力学计算
Si-Mn系低碳钢经DP和TRIP处理后组织与性能的对比性研究
高锰钢中的TRIP和TWIP效应以及层错能研究
Effect of strain rate on deformation behavior of TRIP steels
Hot dip galvanizing behaivor of advanced high strength steel
Coarsening of M23C6 Precipitates in Fe-Cr-C Ternary Alloy
Thermodynamic Reoptimization of the Fe-P System
Thermodynamic re-assessment of the Ni-Sn system
含TRIP钢效应的Fe-18Mn-Si-C热轧TWIP钢的设计与研究
Thermodynamic evaluation and assessment of the Ti-U binary system
Computer Simulation of Fe-Al-Si System Diffusion Couples
A thermodynamic modeling of the Fe-Ti-V system
Tensile mechanical behavior of cold rolled Si-Mn Steel under different strain rates
Thermodynamic Optimization of the Al-Fe-P Ternary System
Experimental and computational study on microstructureal evolution in 2205 duplex stainless steel du
The effect of alloy elements on selective oxidation and galvanizability of TRIP-aided steel
Effect of dew point on the surface selective oxidation and subsurface microstructure of TRIP-aided s
Modeling of Nucleation and Growth of M23C6 Carbide in Multi-component Fe-based Alloy
Variation of solute distributions during deformation and bake hardening process and their effect on
Effect of Mn and P on precipitation behavior and solute distribution in ultra-low carbon bake harden
Study on Mn and P solute distributions and their effect on the tensile behavior in ultra low carbon
Martensite Transformation and Its Control in DP, TRIP and TWIP Steels
Thermodynamic optimization of the NaCl-PrCl3 system and the LiCl-NaCl-PrCl3 system
Thermodynamic description of the CuBr-MBr(M=Na,K,Rb) pseudo-binary systems
Effect of Ni on the stability of retained austenite and mechanical properties for TRIP steels contai
Thermodynamic re-modeling of the Co-Fe-Gd system
A thermodynamic description of the Al-Mo-Si system
Si-Mn 系低碳钢经不同热处理后动静态性能的对比研究
Thermodynamic re-modeling of the Co-Gd system
Al-Fe-P三元系的热力学优化
基于CALPHAD方法的摩尔体积建模
0.15C-0.14Si-0.2Mn-0.04Nb钢的静态再结晶行为研究
热冲压成形技术及其新进展
Influence of Soaking Temperature on Microstructure of Multi-pass Compression Deformation for Low Carbon Steels
Fe-P体系热力学再优化
980MPa级TRIP钢的热塑性研究
联合研发先进高强汽车钢在国产中档和高档轿车上的应用
激光焊接速度对高锰塑性诱发孪晶钢组织性能影响
微合金超高强度钢的热变形行为及流变应力模型
影响FB780先进高强度钢扩孔性能的因素
Application of thermodynamics in designing of advanced automotive steels
Application of new VBHF optimization strategy to improve formability of automobile panels with aluminum alloy sheet
基于KSII试验的焊点失效模拟研究
期刊信息
  • 《上海金属》
  • 中国科技核心期刊
  • 主管单位:上海市科学技术协会
  • 主办单位:上海市金属学会
  • 主编：翟启杰
  • 地址：上海市延长路149号15信箱
  • 邮编：200072
  • 邮箱：shmetals@sh163.net
  • 电话：021-56382976 56332810
  • 国际标准刊号：ISSN：1001-7208
  • 国内统一刊号：ISSN：31-1558/TF
  • 邮发代号:4-833
  • 获奖情况:
  • 1991年上海市优秀科技期刊,1996年上海市优秀科技期刊
  • 国内外数据库收录:
  • 美国化学文摘（网络版）,荷兰文摘与引文数据库,美国剑桥科学文摘,英国科学文摘数据库,中国中国科技核心期刊,中国北大核心期刊（2011版）,中国北大核心期刊（2014版）
  • 被引量:4476