包含在 macroporous 氧化铝支持上扔的二 imidazolate ligands 的 zeolitic imidazolate 混血儿膜(Co-IM-mIM ) 被预先扔和第二等的生长技术准备。XRD, TGA 和 SEM 描述证明一个马厩和薄,却稠密、纯阶段的 Co-IM-mIM 膜能在 120 牰灯牥楴 在排队特氟隆重的压热器在 macroporous 氧化铝磁盘上被获得吗?
A zeolitic imidazolate hybrid membrane(Co-IM-mIM) containing two imidazolate ligands deposited on a macroporous α-alumina support was prepared by pre-depositing and secondary growth technique. XRD, TGA and SEM characterizations demonstrate that a stable and thin, but dense and pure-phase Co-IM-mIM membrane can be obtained on the macroporous-alumina discs in Teflon-lined autoclave at 120 °C after pre-depositing by dip-coating at room temperature. No visible cracks, pinholes or other defects were observed on the membrane layer. The gas separation studies of Co-IM-mIM membrane were carried out at 25 °C and 1×10~5 Pa, showing ideal selectivity of 6.95, 5.25, 3.40 for H_2/CO_2, H_2/N_2 and H_2/CH_4, respectively, and a permeance of 17.37× 10~(-6) mol/(m~2·s·Pa) for H_2. The influence of temperature and trans-membrane pressure on hydrogen separation and permeation was also carried out. The gas permeation and selectivity demonstrate that this membrane may have potential applications for efficient H_2 separation.