位置：成果数据库 > 期刊 > 期刊详情页
Dynamic response of the leading edge wing under soft body impact
  • ISSN号：1358-8265
  • 期刊名称：International Journal of Crashworthiness
  • 时间：2012
  • 页码：357-376
  • 相关项目：超细晶材料在高温、高应变率下的力学行为
作者： Zakir, Sheikh Muhammad|Li, Yulong|
同期刊论文项目
超细晶材料在高温、高应变率下的力学行为
期刊论文 64 会议论文 11
同项目期刊论文
航空铆钉的动态力学性能测试
航空常用铝合金动态拉伸力学性能探究
New criterion for evaluating influences of stress uniformity on results in split Hopkinson bar tests
Compressive behavior and rate-controlling mechanisms of ultrafine grained copper over wide temperatu
The compressive and tensile behavior of a 0/90 C fiber woven composite at high strain rates
Cu64Zr36合金非晶剪切带形成的分子动力学模拟
A numerical study of microstructure effect on adiabatic shear instability: Application to nanostruct
Impact behavior of honeycombs under combined shear-compression. Part I: Experiments
A modified criterion for shear band formation in bulk metallic glass under complex stress states
应变率对铸造镁合金AZ91压缩力学性能影响研究
Compressive deformation behavior of AZ31 magnesium alloy under quasi-static and dynamic loading
The effect of temperature on mechanical behavior of ultrafine-grained copper by equal channel angula
等径通道挤压制备超细晶金属过程中后压力影响的有限元分析
Influence of short time annealing on strain hardening rate and flow stress of ultrafine grained mate
Temperature and strain rate sensitivity of ultrafine-grained copper under uniaxial compression
Shock enhancement in cellular structures under impact loading by finite element simulation
Dynamic tensile behavior of two-dimensional carbon fiber reinforced silicon carbide matrix composite
Compressive behavior of C/SiC composites over a wide range of strain rates and temperatures
Atomic simulations of the effect of twist grain boundaries on deformation behavior of nanocrystallin
Critical issues related to instrumented indentation on non-uniform materials: Application to niobium
Statistic derivation of Taylor factors for polycrystalline metals with application to pure magnesium
Development of time-reversal method for impact source identification on plate structures
Bridging micromechanisms of Z-pin in mixed mode delamination
Experimental investigation on strain rate sensitivity of ultra-fine grained copper at elevated tempe
数字图像相关方法在焊缝材料力学性能测试中的应用
First-principles study of the properties of Li, Al and Cd doped Mg alloys
A novel approach to testing the dynamic shear response of Ti-6Al-4V
Dynamic fracture toughness of high strength metals under impact loading: Increase or decrease
Effect of twin boundary spacing on deformation behavior of nanotwinned magnesium
堆垛层错和温度对纳米多晶镁变形机制的影响
Strain rate sensitivity and deformation kinetics of ECAPed aluminium over a wide range of strain rat
含缺陷复合材料T型接头失效数值分析
垂直晶界铜双晶的拉伸变形行为
不同温度下超细晶铜的准静态压缩力学行为
基于霍普金森压杆系统的动态压痕实验
超高速碰撞下C-SiC复合材料双层防护结构的力学特性
不锈钢材料高温、高应变率下动态力学性能的试验研究
Application of split Hopkinson tension bar technique to the study of dynamic fracture properties of
堆垛层错和温度对纳米多晶镁变形机理的影响
薄壁异形环截面管材料环向动态拉伸特性测试
碳纤维增韧的陶瓷基复合材料在高温高应变率下的压缩力学行为
Impact behavior of honeycombs under combined shear-compression. Part II: Analysis
A close observation on the deformation behavior of bicrystal copper under tensile loading
不同频率激励下LY12铝合金悬臂梁的疲劳特性
超高速碰撞下C—SiC复合材料双层防护结构的力学特性
常温下超细晶纯钛的制备及其力学性能
一种绸布的冲击拉伸性能实验
等径通道挤压铝在较宽温度和应变率下的单轴压缩行为(英文)
不同温度和应变速率下超细晶铝的力学行为
Application of split Hopkinson tension bar technique to the study of dynamic fracture properties of materials
Al,Zn,Cu和Cd固溶于B2-MgLi本征特性的第一原理研究
基于粘聚区模型的含填充区复合材料接头失效数值模拟
2024铝合金振动疲劳特性及断口分析
Investigation on experimental method of low-impedance materials using modified Hopkinson pressure bar
Compressive deformation behavior ofAZ31 magnesium alloy under quasi-static and dynamic loading
二维数字图像相关方法的拉伸实验误差分析
NOVEL APPROACH TO TESTING THE DYNAMIC SHEAR RESPONSE OF Ti-6Al-4V
Cu_（64）Zr_（36）合金非晶剪切带形成的分子动力学模拟