欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
对具有漫灰体内壁的金属蜂窝夹芯面板，忽略蜂窝内腔的空气导热，综合考虑蜂窝结构的热传导和热辐射等热传递过程，利用有限元方法求解了周期性分布的蜂窝单胞稳态热传导控制方程，蜂窝内壁的边界条件是由净热量法得到的热辐射换热积分方程，由胞元的温度场分布数据及Fourier定律得到了蜂窝结构的有效导热系数。与现有文献相比，采用了较少近似的模型及较高精度的离散方法，计算结果表明计算模型及方法是可靠有效的。
英文摘要：
In this paper, the effective thermal conductivity of metal honeycomb core sandwich panel which have diffuse gray inner walls is analyzed. Ignoring gas conduction within the honeycomb cells, the coupled influence of solid conduction through honeycomb cell wall and heat transfer by radiation in the honeycomb enclosure is taken into consideration. Finite element method was used for solving the steadystate heat conduction equation in periodic distributed honey- comb cell, which takes integral equations of radiation heat flux on the honeycomb inner wall as radiation boundary conditions. By applying the Fourier＇ law, the effective thermal conductivity of honeycomb sandwich panel is derived from the temperature distribution data. Compared with the existing literature, the model in this article has less approximation for radiative heat exchange and the discrete method of this model has higher precision. The results show that the calculation model and method are valid and reliable.
同期刊论文项目
同项目期刊论文
Error estimate of the homogenization solution for elliptic problems with small periodic coefficients
A bi-value coding parameterization scheme for the discrete optimal orientation design of the composi
High temperature thermomechanical behavior of silica-phenolic composite exposed to heat flux environ
Second-Order Two-Scale Analysis Method for the Heat Conductive Problem with Radiation Boundary Condi
The Second-Order Two-Scale Method for Heat Transfer Performances of Periodic Porous Materials with I
The Statistical Second-Order Two-Scale Method for Heat Transfer Performance of Random Porous Materia
The statistical second-order two-scale analysis for dynamic thermo-mechanical performances of the co
The lattice structure configuration design for stereolithography investment casting pattern using to
Investigation on the compressive properties of the three dimensional four-directional braided compos
Effect of Interface Properties on Mechanical Behavior of 3D Four-Directional Braided Composites with
A new computational algorithm for modeling thermo-mechanical frictional contact problems of polycrys
The Thermo-Mechanics Coupled Model of Polycrystalline Aggregates Based on Plastic Slip System in Cry
Investigations on the deformation behavior of polycrystalline Cu nanowires and some factors affectin
The statistical second-order two-scale method for mechanical properties of statistically inhomogeneo
Shape optimization of 3D curved slots and its application to the squirrel-cage elastic support desig
A bispace parameterization method for shape optimization of thin-walled curved shell structures with
A strain energy model for the prediction of the effective coefficient of thermal expansion of compos
Investigations on the deformation mechanisms of single-crystalline Cu nanowires under bending and to
Microstructure modelling and prediction of effective elastic properties of 3D multiphase and multila
Atomistic Simulations on the Mechanical Behavior of Single-Crystalline Cu Nanowires Under Bending an
期刊信息
位置：