东篱科研大数据发现系统（DRDS）

位置：成果数据库 > 期刊 > 期刊详情页

滚刷式烟叶铺平装置刷毛参数与结构设计

ISSN号：2095-5553
期刊名称：《中国农机化学报》
时间：0
分类：S226.5[农业科学—农业机械化工程;农业科学—农业工程]
作者机构：[1]贵州大学机械工程学院,贵阳市550025, [2]贵州省烟草公司黔南州公司,贵州黔南558000
相关基金：贵州大学研究生创新基金（研理工2015024）——烟叶自动分拣系统关键技术研究;贵州大学研究生创新基金（研理工2015021）——烟叶位姿纠正控制系统关键技术研究; 贵州省科技计划项目（黔科合GZ字（2015）3007）——贵州山地残膜捡拾机具研发及应用研究

作者：潘东彪[1], 吴雪梅[1], 苏国樟[1], 陈永安[2], 王毅[2], 张富贵[1]

关键词：正交试验, 刷毛变形量, 滚刷轴半径, 刷毛长度, 刷毛种类, orthogonal test, deformation quantity of brush hairs, the radius of the roller brush shaft, the length of the brush hairs, material of the brush hairs

中文摘要：

为实现基于计算机视觉的烟叶自动分级,需对褶皱烟叶进行单张铺平。本文用滚刷式烟叶铺平装置,对影响烟叶铺平效果的因素进行了正交试验,分析了滚刷轴半径、刷毛长度、刷毛材质三个水平因素。结果表明：刷毛材质对刷毛变形影响最大,其次是刷毛长度;在滚刷轴半径为25mm、刷毛长度为35mm、刷毛种类为尼龙1010的组合下,刷毛变形后和烟叶的夹角最小值为90.319°,刷毛变形量最大。

英文摘要：

In order to realize automatic classification of tobacco leaves based on computer vision,it is needed to extend single leaf.In this paper by using the roller mechanism,factors that affecting the rolling effect of the tobacco leave by orthogonal test were analyzed.Three factors were radius of the roller brush,the length of the brush and the material of the brush.The results showed that the material of the brush was the most influential to leave spreading effect.The length of the brush was next to it.When the radius of the rolling brush,the length of the brush, the material of the brush,and the degreeαwhich between formation and deformation of the brush is 25 mm,35mm,nylon 1010.When the minimum degree between the leaf and the formation brush was 90.319°,the deformation of the brush was max.