位置：成果数据库 > 期刊 > 期刊详情页
Effect of Shot peening and plasma electrolytic oxidation on the intergranular corrosion behavior of
  • 期刊名称：Acta Metall
  • 时间：2014.4.1
  • 页码：705-713-
  • 相关项目：钛合金等离子表面合金化与形变强化协同抗微动疲劳的机制研究
作者： Zuoyan Ye, Daoxin Liu, Chongyang Li|
同期刊论文项目
钛合金等离子表面合金化与形变强化协同抗微动疲劳的机制研究
期刊论文 53 会议论文 23 获奖 2
同项目期刊论文
Tribology behavior of double-glow discharge Mo layers on titanium alloy in aviation kerosene environ
含半球形腐蚀缺陷钢管剩余强度的有限元分析
前处理与超音速火焰喷涂金属陶瓷涂层对TC21钛合金疲劳性能的影响
碳纤维环氧复合材料与不同表面状态TC16钛合金偶对的电偶腐蚀
钛及钛合金的缝隙腐蚀行为
Ti6Al4V钛合金表面Zr-N合金化层的抗高温摩擦磨损性能
渗碳与喷丸复合处理对18Cr2Ni4WA钢表面完整性及疲劳性能的影响
Finite Element Method Analysis of the Stress for Line Pipe with Corrode Groove During Outdoor Storag
喷丸、喷砂与HVOF WC-17Co 涂层表面完整性对TC18 钛合金疲劳性能的影响
Formation process and cross-sectional hardness of a Cr-alloyed layer on Ti6Al4V alloy
Characterization and mechanical properties investigation of TiN-Ag films onto Ti-6Al-4V
Corrosion fatigue behavior of 7A85 aluminum alloy thick plate in NaCl solution
Application of plasma electrolytic oxidation to the novel aircraft aluminum alloy for enhancing corr
Surface modification of Ti-6Al-4V alloy by cathode assiting discharge setup and conventional plasma
TC4合金表面离子渗Zr-N层的常温和600℃高温耐磨性
封闭对铝合金微弧氧化膜在酸性溶液中耐蚀性的影响
表面改性钛合金与增强型聚四氟乙烯在海水中的摩擦学行为
Effects of prior Corrosion with and without stress on the mechanical properties of 7475-T761 aluminu
Effects of combined plasma chromizing and shot peening on the fatigue properties of a Ti6Al4V alloy
喷丸强化与应力因素对2E12-T3铝合金剥蚀行为的影响
航空用TC18钛合金的车削加工技术研究
表面处理对17-4PH不锈钢抗固体粒子冲蚀性能的影响
喷丸强化对2060铝锂合金表面完整性和疲劳性能的影响
喷丸强化对新型7055-T7751铝合金疲劳性能的影响
钛合金表面离子束增强沉积NiCr 膜的耐腐蚀磨损性能
辉光离子渗氮对Ti6Al4V合金在航空煤油中摩擦学性能的影响
陶瓷丸喷丸对2024HDT 铝合金疲劳性能的影响
Fretting wear and fretting fatigue behaviors of diamond-like carbon and graphite-like carbon films d
Repair of Shot Peening on Fatigue Properties of High-Strength TC18 Titanium Alloy for Aviation
微弧氧化与稀土铈盐封孔对7A85新型铝合金耐蚀和耐磨性能的影响
Tribology Behavior of Zr-N Alloying Layer on Ti6A14V Alloy Surface at Elevated Temperature
Ti6Al4V钛合金表面阴极辅助离子氮化及其摩擦学性能
含平底型腐蚀缺陷钢管剩余强度的有限元求解和实验验证
Ti6Al4V合金与AISI420不锈钢表面离子渗Cr及耐磨性
Beam assisted deposition film for improving fretting fatigue resistance of Ti8Al1Mo1V alloy at eleva
The effects of machined workpiece surface integrity on the fatigue life of TC21 titanium alloy
喷丸强化对TC4钛合金表面完整性及疲劳性能的影响
喷丸强化与表面完整性对TC21钛合金疲劳性能的影响
喷丸强化与应力因素对2E12铝合金晶间腐蚀行为的影响
腐蚀与交变载荷循环作用对2A12-T4铝合金疲劳寿命的影响
氯化铁溶液中316L和HR-2不锈钢的腐蚀行为研究
Effects of Prior Corrosion with and Without Stress on the Mechanical Properties of 7475-T761 Aluminum Alloy
A Comparison Study of Wear and Fretting Fatigue Behavior Between Cr-alloyed Layer and Cr-Ti Solid-solution Layer
Finite Element Method Analysis of the Stress for Line Pipe with Corrode Groove During Outdoor Storage
钴基合金渗层对钛合金耐磨、抗蚀性能的影响
喷丸、喷砂与HVOF WC-17Co涂层表面完整性对TC18钛合金疲劳性能的影响
夹具材料对00Cr18Ni10N不锈钢扩散连接接头耐蚀行为的影响
拉应力与电偶因素对2E12铝合金腐蚀行为的影响
航空用TC18钛合金的车削加工工艺技术研究