欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
为研究氧化钨的形貌结构对纳米钨粉末制品均匀性的影响,用X射线衍射分析仪和电子扫描电镜对普通黄钨在660℃下还原的过程产物进行了分析、观测。同时分别以普通黄钨和强力球磨分级处理的细黄钨为原料,采用经优化的工艺条件制备出了纳米W、WC粉末,并对粉末及其快速烧结体的显微组织结构进行了观察、分析。结果表明,不同形貌结构原料制备的纳米W、WC粉末,均呈现出不同程度的形貌结构遗传特性,强力球磨分级处理所获细黄钨颗粒细小、形貌结构疏松,更容易制备出结构较疏松,分散性较好的纳米W、WC粉末。
英文摘要：
Different tungsten oxides were prepared from yellow tungsten by hydrogen reduction at the temperature of 660 ℃ for different time. The morphological characteristics of different powders were observed and analyzed. In addition, nano-tungsten and tungsten carbide powders were manufactured using powerful milled WO3 powders as raw materials and compared with similar powders made by ordinary WO3 as precursors. The microstructures of the powders and the rapid sintered samples were characterized. The results show that the morphologies of nano-tungsten and tungsten carbide powders show characteristics inherited from oxide precursors to some extend. The nano-tungsten and tungsten carbide powders prepared by powerful milled WO3 as raw material show better characteristics, such as better dispersion, less agglomeration, better uniformity, etc. The microstructures of ultra-fine rapid WC-Co alloy prepared by powerful milled WO3 powders as precursors are uniform.
同期刊论文项目
同项目期刊论文
Large electrical resistivity and high saturation magnetization nanocrystalline Fe86B13Cu1 alloy prep
Microstructures and soft magnetic properties of nanocrystalline Fe86B13Cu1 alloy annealed by hot iso
位置：