欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
La57.6Al17.5(Cu,Ni)24.9 and La64Al14(Cu,Ni)22 bulk metallic glasses (BMGs) were prepared by copper-mould casting method. Plastic deformation behavior of the two BMGs at various loading rates was studied by nanoindentation. The results showed that the La57.6Al17.5(Cu,Ni)24.9 BMG with a glass transition temperature of 423 K exhibited prominent serrated flow at low loading rates, whereas less pronounced serrated flow at high rates during nanoindentation. In contrast, the La64Al14(Cu,Ni)22 BMG with a glass transition temperature of 401 K exhibited prominent serrated flow at high loading rates. The different rate dependency of serrated flow in the two La-based BMGs is related to the different glass transition temperature, and consequently the degree of viscous flow during indentation at room temperature. A smoother flow occurs in the alloy with relatively lower glass transition temperature, due to the relaxation of stress concentration.
同期刊论文项目
同项目期刊论文
Effect of structural relaxation on hardness and shear band feature of Zr64.13Cu15.75Ni10.12Al10 bulk
Spinning and processing continuous yarns from 4-inch wafer scale super-aligned carbon nanotube array
Evaluation of effectiveness of representative methods for determining Young’s modulus and hardness f
Carbon nanotube reinforced hydroxyapatite composite coatings produced through laser surface alloying
Size, geometry and nonuniformity effects of surface-nanocrystalline aluminum in nanoindentation test
Response to Comment on Deformation mechanisms of face-centeredcubic metal nanowires with twin bounda
Determination of interface properties between micron-thick metal film and ceramic substrate using pe
Grain boundary effects on plastic deformation and fracture mechanisms in Cu nanowires: Molecular dyn
Formation of fivefold deformation twins in nanocrystalline face-centered-cubic copper based on molec
Trans-scale mechanics: looking for the missing links between continuum and micro/nanoscopic reality.
Atomistic investigation of the effects of temperature and surface roughness on diffusion bonding bet
Revelation of a functional dependence of the sum of two uniaxial strengths/hardness on elastic work/
Experimental verification and theoretical analysis of the relationships between hardness, elastic mo
The Influence of Annealing on Mechanical Properties of Hydrogenated Nanocrystalline Silicon Thin Fil
Nonlocality effect in atomic force microscopy measurement and its reduction by an approaching method
Inverse analysis to determine interfacial properties between metal film and ceramic substrate with a
Toughness of Ni/Al2O3 interfaces as dependent on micron-scale plasticity and atomistic-scale separat
Molecular/Cluster Statistical Thermodynamics (MST/CST) Simulation and Its Application to Nano-Indent
Peeling experiments of ductile thin films along ceramic substrates - - -Critical assessment of analy
位置：