欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
基于性能的结构设计对构件非线性变形能力的计算精度提出了更高的要求，为了研究剪力墙结构基于性能的设计方法，在同济大学土木工程防灾国家重点实验室进行了18片不同设计参数的钢筋混凝土剪力墙构件的拟静力试验，根据试验结果分析剪力墙极限位移的组成，推导不同破坏形态下考虑剪切、弯曲变形影响的极限位移计算公式，对剪切位移的影响因素及其大小和塑性铰区长度、截面曲率在塑性铰长度范围内的分布进行分析，提出用弯剪比参数计算剪力墙塑性铰区长度的方法，为剪力墙结构基于性能的设计方法提供了一种途径。
英文摘要：
Performance-based design requires sound accuracy in estimating the non-linear deformation capacity of structural members. To study the performance-based design procedure for shear wall structures, pseudo-static tests for eighteen RC shear walls with different design parameters were conducted in the state key laboratory for disaster reduction in civil engineering at Tongji University. Based on the test results, the components of the shear wall ultimate displacement are analyzed to derive a formula which takes into account of the effects of shearing and flexural deformation for different failure mechanisms. The influencing factors and the scale of shear displacement, the length of plastic hinges and the distribution of cross-section curvatures have also been analyzed. A method for the calculation of the length of plastic hinges using flexure shear ratio is proposed. The formula for the ultimate displacement of shear wall provides a practical tool for the performance-based design procedure of shear wall structures.
同期刊论文项目
同项目期刊论文
Shaking table model test and numerical analysis of a supertall building with high-level transfer sto
Studies of the performance of particle dampers attached to a two-degrees-of-freedom system under ran
Experimental and numerical study on the behavior of axially compressed high strength steel columns w
Experimental studies of the effects of buffered particle dampers attached to a multi-degree-of-freed
期刊信息
位置：