位置：立项数据库 > 立项详情页
表面织构的微细电解加工基础问题及关键技术研究
  • 项目名称：表面织构的微细电解加工基础问题及关键技术研究
  • 项目类别：联合基金项目
  • 批准号：U1134003
  • 项目来源：国家自然科学基金
  • 研究期限：1900-01-01-1900-01-01
  • 项目负责人：朱荻
  • 依托单位：南京航空航天大学
  • 批准年度：2011
成果综合统计
成果类型
数量
  • 期刊论文
  • 会议论文
  • 专利
  • 获奖
  • 著作
  • 54
  • 12
  • 0
  • 0
  • 0
期刊论文
Study on the frictional properties of micro-magnet arrayed surface lubricated with ferrofluids
Modified microscale pattern transfer without photolithography of substrates
Reduction of undercutting in electrochemical micro-machining of micro-dimple arrays by utilizing oxy
Preparation and Characterization of Electrodeposited Ni-CeO2 Nanocomposite Coatings with High Curren
Fabrication of Ni-CeO2 Nanocomposite Coatings Synthesised via a Modified Sediment Co-Deposition Proc
Improving the Localization of Surface Texture by Electrochemical Machining with Auxiliary Anode
Fabrication of PDMS micro through-holes for electrochemical micromachining
基于光致抗蚀干膜的掩膜制备及其应用研究
Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film
电解加工中微细电极尖端效应的实验研究与仿真
生物芯片微流道的微细加工工艺
精密模具大面积微结构电铸制备工艺研究
微细掩膜电解加工的孤岛有限元仿真研究
织构化配流副摩擦磨损性能试验
混合织构发动机缸套的减摩试验研究
掩膜间隙和刻蚀温度对738模具钢侧蚀量的影响
电火花加工过程的温度场仿真与研究
Experimentalstudy of electrophoretically assisted micro-ultrasonic machining
Formationof porous hydrophobic stainless steel surfaces by maskless electrochemicalmachining
Improvement of dimensional uniformity on micro-dimple arrays generated by electrochemical micro-mach
Electrochemical etching of cylindrical nanoprobes using a vibrating electrolyte
Removal of islands from micro-dimple arrays prepared by through-mask electrochemical micromachining
Simulation Research on the Heat Dissipation Performance of a High Power LED Radiator
Preparation of a microprism Ni-Ceo2 nanocomposite mold by electroforming
阴极轨迹式平动型电铸机床PLC控制系统设计与实验
Fabrication of microprism mould by electroforming with high electrolyte flowrate
化学微蚀刻法和微细电镀法制备微流控芯片金属模具工艺对比研究
直流和直流脉冲电解制备表面多孔结构对比研究
部分沟槽表面织构摩擦学性能研究
Electrochemical micromachining of small tapered microstructures with sub-micro spherical tool
模具钢大面积微结构的微细电解和化学蚀刻的比较研究
Electrochemical micromachining of micro-dimple arrays using a polydimethylsiloxane (PDMS) mask
Design principles for the area density of dimple patterns
Investigation of machining accuracy of micro-dimples fabricated by modified microscale pattern trans
The Fabrication and Application of a PDMS Micro Through-Holes Mask in Electrochemical Micromanufactu
Pulsed electrochemical micromachining for generating micro-dimple arrays on a cylindrical surface wi
注塑模具型腔表面阵列微结构的蚀刻技术
微流控芯片模具化学蚀刻制造工艺研究
Tribological properties of magnetic surface lubricated by ferrofluids
会议论文
Study on undercut characteristics of die steel in spray etching
Research on surface roughness of die steel in Micro-etching
Investigation on the Load Carrying Capacity of Textured Surface Based onInterferometry Measurements
微小凹坑电解加工过程的仿真研究
PDMS 表面复合梯度凸起织构的干摩擦学行为研究
表面织构改善金属/聚合物机械密封磨损性能研究
A study of processing Al 6061 with electrochemical magnetic abrasive finishing
Surface texture design for the tribo-pair of UHMWPE/steel
The design and fabrication of dimples pattern on the surface of UHMWPE
模具钢大面积微结构的微细电解和化学蚀刻的比较研究
生物芯片微流道的微细加工工艺
微小凹坑电解加工过程的仿真研究
朱荻的项目
屏蔽膜板随动式高深宽比微细电铸技术
期刊论文 10 会议论文 3
纳米级晶粒精密电铸技术研究
期刊论文 31
线电极微尺度电解加工基础研究
期刊论文 7 会议论文 4 获奖 4
脉动态精密电解加工的方法和理论
基于碳纳米管工具电极的纳米电解加工技术基础研究
期刊论文 13 会议论文 4
精密、微细电铸技术研究
期刊论文 7
先进制造技术国际研讨会
微细电加工及其微小装备的基础研究
期刊论文 71 会议论文 11 获奖 1 专利 13 著作 2
难加工材料薄壁微槽板精密电解加工的基础研究