位置：成果数据库 > 会议 > 会议详情页
Cutting performances of boron doped diamond-coated milling tools in machining graphite
  • 所属机构名称：广东工业大学
  • 会议名称：14th International Manufacturing Conference in China, IMCC2011
  • 成果类型：会议
  • 会场：Tianjin, China
  • 相关项目：超高速钻削多层高密度印刷电路板超微细孔加工研究
作者： Zhang, Z.M.|Shen, B.|Chen, M.|Sun, F.H.|Lei, X.L.|Wang, L.|
同会议论文项目
超高速钻削多层高密度印刷电路板超微细孔加工研究
期刊论文 21 会议论文 34
同项目会议论文
Experimental and FEM modal analysis of workbench for PCB drilling machine
Simulation of drilling on the copper of PCB with ultra-high-speed
Drilling force and chip morphology in drilling of PCB Supported hole
Cutting forces of PCB supported hole
Analysis on the microstructure of carbide reamers after the cryogenic treatment
Cutting parameters optimization by fuzzy synthetic evaluation and BP neural network in milling alumi
A FEM and experimental study of chip formation in orthogonal cutting of superalloy GH80A
Optimization of twist drill';s geometry for cast iron
Machinability evaluation of the finish hard turning α+β titanium alloys
Optimization of surface roughness by uniform design of experiments in milling of 1Cr18Ni9Ti
Machinability evaluation of Tc11 titanium alloy in finish hard turning based on the response surface
Study on the surface topography and residual stress for dry turning of Gh80A
Study on the machinability of two different sulfur free cutting steels
Study on the residual stress induced by dry turning of buttress thread
An investigation of the wear mechanism for carbide tools in face milling the Ti-5Al-4.75Mo-4.75V-1Cr
Milling force modeling for Ti-5Al-5Mo-5V-1Cr-1Fe alloy
Fundamentals of BK7 glass removal in micro/nano-machining
Investigation of surface integrity in conventional grinding of Ti-6Al-4V
Surface roughness prediction in turning of free machining steel 1215 by artificial neural network
Parameters optimization of turning free cutting steel based on the coupling method of response surfa
Research on the edge design precision PCD thread milling tool
Experimental study on the performance of WC-Co inserts in turning 4Cr13 die steel
Module partition and application for Printed Circuit Board high speed drilling machine
Dry turning of rotor steel 26NiCrMoV145 using multilayer coated cemented carbide tools
A review on drilling printed circuit boards
Research on new helical-conical grinding method for PCB drill
Parameters Optimization of Turning Free Cutting Steel Based on the Coupling Method of Response Surfa
The investigation of thrust force of printed circuit board drilling
Fabrication and application of diamond coated micro ball end mills
Investigation of cutting force and temperature of end-milling Ti-6Al-4V with different minimum quant
Study on grinding machinability of titanium alloy using SiC abrasive
Analysis of specific energy of TC18 and TA19 titanium alloys in surface grinding
Analysis on finish hard turning of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy