欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
研究了中空纳米夹杂填充复合材料的反平面问题。基于Gurtin-Murdoch表／界面理论和广义自洽方法，给出了考虑夹杂界面效应时空隙一夹杂一基体一等效介质模型的全场精确解，并推导了中空纳米夹杂填充复合材料有效反平面剪切模量的闭合形式解。由本文结果的特殊情形，可以得到一系列有意义的解。数值结果表明：中空夹杂的尺寸在纳米量级时，复合材料的有效反平面剪切模量受表／界面效应影响显著；表／界面效应的影响随着夹杂尺寸的增大而逐渐减弱；当中空纳米夹杂的体积分数和外半径一定时，壁厚越薄其表／界面效应越大；在相同的夹杂外半径下，中空纳米夹杂填充复合材料的表／界面效应比实心纳米夹杂填充复合材料更加明显；无量纲反平面剪切模量受夹杂的表／界面性能和刚度影响显著，过高的夹杂刚度使得表／界面效应的影响变弱。
英文摘要：
The effective anti-plane shear modulus was studied for the composites containing hollow nano inclusion. Based on the theory of Gurtin-Murdoch surface/interface theory and the generalized self-consistent method, the rigorous whole-field solution is obtained for the void-inclusion-matrix-equivalent medium model. The closed- form solution of the effective anti-plane shear modulus of the hollow nano inclusion composites is presented. Many significant solutions can be regarded as special or degenerated cases. The numerical results reveal that the effective anti-plane shear modulus is influenced remarkably when the size of the hollow nano inclusion is on the order of nanometer. With the increase of the size of the hollow nano inclusion, the surface/interface effect abates gradually. For the same volume fraction and outer radius of the hollow nano inclusion, the thinner the wall thickness is, the greater of the surface/interface effect is. The surface/interface effect of the hollow nano composites is much larger than that of the solid nano composites for the same outer radius of the inclusion. The effective anti- plane shear modulus of the hollow nano composites depends strongly on the surface/interface property and the stiffness of the inclusion. A very hard inclusion shields the surface/interface effect.
同期刊论文项目
同项目期刊论文
Realization of exceptionally high elongation at high strain rate in a friction stir processed Al-Zn-
Atomic-scale simulation of alpha/gamma-iron phase boundary affecting crack propagation using molecul
Microstructure evolution and mechanical properties of nanocrystalline zirconium processed by surface
Unusual grain-size and strain-rate effects on the serrated flow in FeMnC twin-induced plasticity ste
Abnormal room temperature serrated flow and strain rate dependence of critical strain of a Fe-Mn-C t
Inconsistent effects of mechanical stability of retained austenite on ductility and toughness of tra
Simultaneously improving the strength and ductility of coarse-grained Hadfield steel with increasing
Effect of martensitic morphology on mechanical properties of an as-quenched and tempered 25CrMo48V s
Microstructure and mechanical properties of a low carbon carbide-free bainitic steel co-alloyed with
Effect of microstructure on the strength of 25CrMo48V martensitic steel tempered at different temper
Annealing softening behaviour of cold-rolled low-carbon steel with a dual-phase structure and the re
Microstructure and mechanical properties of high-carbon Si-Al-rich steel by low-temperature austempe
High Strain Rate Superplasticity in a Micro-grained Al-Mg-Sc Alloy with Predominant High Angle Grain
Size-dependent effective electroelastic moduli of piezoelectric nanocomposites with interface effect
Effects of retained austenite and hydrogen on the rolling contact fatigue behaviours of carbide-free
Austenite deformation behavior and the effect of ausforming process on martensite starting temperatu
Characterization of the microstructures and mechanical properties of 25CrMo48V martensitic steel tem
期刊信息
位置：