位置：成果数据库 > 期刊 > 期刊详情页
Atomic-scale simulation of alpha/gamma-iron phase boundary affecting crack propagation using molecul
  • ISSN号：0927-0256
  • 期刊名称：COMPUTATIONAL MATERIALS SCIENCE
  • 时间：2011.3.3
  • 页码：1754-1762
  • 相关项目：高速铁路辙叉制造技术基础研究
作者： Zhang, Yan|Zhang, Fu-cheng|Qian, Li-he|Wang, Tian-sheng|
同期刊论文项目
高速铁路辙叉制造技术基础研究
期刊论文 88 会议论文 3 获奖 2 专利 10 著作 1
同项目期刊论文
贝氏体钢辙叉与U71Mn钢轨的焊接
服役加工硬化后高锰钢辙叉心轨应力/应变场分析
Realization of exceptionally high elongation at high strain rate in a friction stir processed Al-Zn-
Effect of cold rolling on microstructure and mechanical properties of pure Zr
In-Situ TEM Study of Hydrogen-Induced Cracking in Carbide-Free Bainitic Steel
Microstructure evolution and mechanical properties of nanocrystalline zirconium processed by surface
Unusual grain-size and strain-rate effects on the serrated flow in FeMnC twin-induced plasticity ste
渗碳20CrMnMoAl钢表面硬贝氏体的制备及其组织特征
38CrMoAl钢表面超细贝氏体组织的研究
高密度脉冲电流对服役后期高锰钢辙叉组织结构的影响
高锰钢辙叉机械冲击预硬化工艺研究
高锰钢辙叉材料研究进展
Microstructure of the worn surfaces of a bainitic steel railway crossing
High speed pounding: A novel technique for the preparation of a thick surface layer with a hardness
Wear behaviour of nanocrystallised Hadfield steel
辙叉用贝氏体钢热处理工艺研究
Abnormal room temperature serrated flow and strain rate dependence of critical strain of a Fe-Mn-C t
Low-cycle fatigue behavior of a high manganese austenitic twin-induced plasticity steel
Micro-characterization of macro-sliding wear for steel
高锰钢辙叉振动特性的数值研究
Rolling Contact Fatigue Property of Low-Temperature Bainite in Surface Layer of a Low Carbon Steel
Dynamic recovery: the explanation for strain softening behaviour in Zr-2.3Nb alloy
Deformation, fracture, and wear behaviours of C + N enhancing alloying austenitic steels
Explosion Deformation and Hardening Behavior of High Manganese Steel Crossing
Improvement of formation quality for friction stir welded joints
氢对贝氏体辙叉钢摩擦磨损行为的影响
固定型辙叉滚动接触疲劳宏观机理
Micromechanics behavior of fatigue cracks in Hadfield steel railway crossing
Effect of Annealing on Microstructure and Hardness of Hot and Cold Rolled Zr705
Inconsistent effects of mechanical stability of retained austenite on ductility and toughness of tra
N rich nanocrystalline bainite in surface layer of carbon steel
Evaluation of effective electroelastic properties of piezoelectric coated nano-inclusion composites
Interaction between periodic cracks and periodic rigid-line inclusions in piezoelectric materials
Effect of Martensite Morphology on Impact Toughness of Ultra-High Strength 25CrMo48V Steel Seamless
Effect of secondary cracks on hydrogen embrittlement of bainitic steels
铝含量对钢渗碳动力学和贝氏体相变动力学的影响
Simultaneously improving the strength and ductility of coarse-grained Hadfield steel with increasing
Effect of martensitic morphology on mechanical properties of an as-quenched and tempered 25CrMo48V s
Microstructural evolution and mechanical properties in Zr705 during the rolling process
Top surface microstructure of friction-stir welded AA2524-T3 aluminum alloy joints
Microstructure and mechanical properties of a low carbon carbide-free bainitic steel co-alloyed with
辙叉用高锰钢的循环变形与硬化
中空纳米夹杂填充复合材料的反平面问题
Achieving high strength and toughness in a Zr-2.3Nb alloy by the formation of duplex microstructure
Effect of microstructure on the strength of 25CrMo48V martensitic steel tempered at different temper
Annealing softening behaviour of cold-rolled low-carbon steel with a dual-phase structure and the re
Sliding wear resistance and worn surface microstructure of nanostructured bainitic steel
Microstructure and mechanical properties of high-carbon Si-Al-rich steel by low-temperature austempe
High Strain Rate Superplasticity in a Micro-grained Al-Mg-Sc Alloy with Predominant High Angle Grain
PREPARATION AND MICROSTRUCTURE OF HARD BAINITE IN SURFACE LAYER OF CARBURIZED 20CrMnMoAl STEEL
Microstructural characteristics of Hadfield steel solidified under high pressure
Numerical simulation of stress and deformation in a railway crossing
Enhanced work hardening in Hadfield steel during explosive treatment
Inter-phase microstress on the grain boundary in Al2O3/SiC nanocomposites
Laboratory Study of the Rolling Contact Fatigue of High Manganese Steel Crossings
Size-dependent effective electroelastic moduli of piezoelectric nanocomposites with interface effect
Formation of duplex microstructure in Zr-2.3Nb alloy and its plasticity behaviour at various strain
Cyclic deformation and fatigue behaviors of Hadfield manganese steel
Low-temperature bainite in low-carbon steel
Effects of retained austenite and hydrogen on the rolling contact fatigue behaviours of carbide-free
Austenite deformation behavior and the effect of ausforming process on martensite starting temperatu
Contact stress and residual stress in the nose rail of a high manganese steel crossing due to wheel
Micro-mechanism of rolling contact fatigue in Hadfield steel crossing
Preparation of nanostructured bainite in medium-carbon alloy steel
Dynamic Strain Ageing in a Twin-Induced Plasticity Steel
Damage of a Hadfield steel crossing due to wheel rolling impact passages
A novel bainitic steel comparable to maraging steel in mechanical properties
Characterization of the microstructures and mechanical properties of 25CrMo48V martensitic steel tem
Deformed Microstructure and Hardness of Hadfield High Manganese Steel
Wear property of low-temperature bainite in the surface layer of a carburized low carbon steel
Improvement of weld temperature distribution and mechanical properties of 7050 aluminum alloy butt j
铁路辙叉用贝氏体钢研究进展
正火处理对贝氏体钢辙叉铝热焊接头性能和组织的影响
70Si3Mn钢中无碳化物贝氏体组织及其性能研究
周期裂纹和刚性线尖端场干涉效应研究
考虑界面应力时纳米涂层纤维增强复合材料的有效力学性能