欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
将传统摄影测量定标和神经网络相结合，克服了传统摄像机定标中因像差等非线性因素造成稳定性不好且算法复杂的缺点．采用基于神经网络的计算机视觉定标方法，用5步法计算未知点的物方坐标．在传统摄影测量定标方法中，需要先制作定标块，其上布置一些控制点，准确测定它们的三维坐标．为保证定标精度，这些控制点必须在三维空间均匀分布，对定标块的制作和加工要求很高．文中提出采用定标板沿法线方向移动的方式代替定标块，既能达到三维效果，显著增加控制点数量，也使制作容易．实验结果表明，以该模板基于神经网络的摄像机定标方法可以获得很高的精度和稳定性．
英文摘要：
We combine the traditional photogrammetry and computation complexity due to nonlinearity factors obtained based on neural network, and the unknown calibration with neural network in this paper to overcome instability such as aberration. Calibration parameters for computer vision are point world coordinates calculated with a five-step method. In traditional photogrammetry calibration, a calibration block is needed, with some control points that require accurate determination of three dimensional coordinates. To achieve high accuracy, these points must be evenly distributed in a three dimensional space, and the coordinates measured with high precision. It is difficult to make the calibration block, especially a big one. We propose to move the calibration plate along its normal direction instead of using a calibration block. The moving plate is a three dimensional block. While achieving a three-dimensional effect, it significantly increases the number of control points. Furthermore, the plate is Experimental results show that the proposed neural network based accuracy and stability. much easier to make than a three dimensional block. method with moving calibration plate can provide high
同期刊论文项目
同项目期刊论文
期刊信息
位置：