中文摘要：

橡皮囊成形是飞机钣金零件的一种重要成形工艺方法,回弹问题是橡皮囊成形的难点,对其影响因素进行显著性分析可有效控制回弹。基于橡皮囊成形有限元数值模拟,将正交试验设计方法与灰色关联度相结合用于分析橡皮囊成形回弹影响因素的显著性,以某实际长直U形件为例分析压力、最大充液速率、最大节点速度、保压时间、弯曲半径、板料厚度以及轧制方向等因素对回弹的影响程度,结果表明,模具圆角半径、压力、板料厚度、保压时间是橡皮囊成形回弹的主要影响因素,而最大充液速度、最大节点速度、轧制方向对回弹的影响较小。分析结果与工艺试验结果相吻合,从而验证了该方法的有效性。

英文摘要：

Rubber bladder forming is a kind of important forming process for aircraft sheet metal parts.The springback problem was of difficulty in rubber bladder forming, and significance analysis on springback infecting factors might control the springback effectively. Herein,orthogonal experimental design combined with grey relation degree was used to analyse the significance for rubber forming springback influence factors based on the finite element numerical simulation, and a practical long straight U-shaped part was taken for example to analyse the influence degree on springback of these factors such as pressure, maximum volume flow rate,maximum node rate,holding time,bending radi- us, sheet thickness and the rolling direction.The analysis results show that bending radius of die, pres- sure,sheet thickness,holding time are the main influence factors for rubber forming springback, and other factors have less effects. The analysis results are consistent with the experimental ones, so the ef- fectiveness of this method can be validated.