欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
提出一种新的线性化积分方法用于求解平锤头压缩带外端的矩形件。在锻压过程中,锤头没有覆盖整个工件,并且工件的侧面通过变形产生鼓形。应用该方法得到了平均锻压力,同时在求解的过程中进行了下列假设：工件与工具间的摩擦力为常数,工件是刚-塑性材料,锻压是在低速度下进行的。然后,通过纯铅的锻压实验,将由黄金分割法得到的优化结果与试验机的实测值进行比较,结果表明优化值比实测值高2.60%-10.14%,这在工程上都是允许的。
英文摘要：
Abstract：ools. The effective strain rate for for determining the total pressure developed during forging of a rectangular bar forging with bulging was expressed in terms of four-dimensional strain rate vector. The inner-product of the vector was termwise integrated and summed. The integral mean value theorem was applied to determining the ratio of the strain rate components and the values of direction cosine of the vector and then an analytical solution of stress effective factor was obtained. The compression experiments of pure lead bar were performed to test the accuracy of the solution. The optimized results of total pressure by golden section search were compared with those of the indicator readings of the testing machine. It indicates that the optimized total pressures are 2.60%-10.14% higher than those measured. The solution is available and still an upper-bound solution.
同期刊论文项目
同项目期刊论文
Microstructural evolution and toughness in the HAZ of submerged arc welded low welding crack suscept
Effect of single pass welding heat input on microstructure and hardness of submerged arc welded high
Effect of austenite grain size on isothermal bainite transformation in low carbon microalloyed steel
Analysis of martensite-austenite constituent and its effect on toughness in submerged arc welded joi
Analysis of microstructural variation and mechanical behaviors in submerged arc welded joint of high
Toughness of welding heat affected zone in high strength steel with low welding crack susceptibility
Effect of reheat temperature on continuous cooling bainite transformation behavior in low carbon mic
Limit load analysis of simply supported circular plate under partial uniformly distributed load with
Analytical solution of plastic limit load for simply supported circular plate under uniformly distri
Structure and micromechanical properties of a weld joint using steel with low sensitivity to weld cr
Analysis of the hardness and elastic modulus distribution in a high strength steel welded joint by n
Continuous cooling temperature field for plate after rolling during fully developed regime by variat
The formation of acicular ferrite and mechanical properties behaviors in a low welding crack suscept
Study on machinability and polishing performance of 1CrMn2MoVTiB non-quenched and tempered plastic m
Variational solution of continuous cooling temperature field for plate after rolling during fully de
The calculation of roll torque and roll separating force for broadside rolling by stream function me
Effect of boron addition on the microstructures and mechanical properties of thermomechanically proc
Analysis of die drawing of round bar and wire in cylindrical coordinate by inner-product of strain r
期刊信息
位置：