位置：成果数据库 > 期刊 > 期刊详情页
表面反应功能结构制造领域的研究现状及发展趋势
  • ISSN号：1007-9289
  • 期刊名称：中国表面工程
  • 时间：2010.4.4
  • 页码：7-14
  • 相关项目：面向醇类制氢的多尺度微通道反应器设计与制造基础研究
作者： 汤勇|潘敏强|王清辉|
同期刊论文项目
面向醇类制氢的多尺度微通道反应器设计与制造基础研究
期刊论文 79 会议论文 11 专利 51
同项目期刊论文
Investigation of sintered stainless steel fiber felt as gas diffusion layer in proton exchange membr
A Micromechanics Elastic-plastic Constitutive Model for Sinted Stainless Steel Fiber Felt
An Experimental Investigation on the Fabrication of Micro/meso Surface Features by Metallic Roll-to-
High-concentration operation of a passive air-breathing direct methanol fuel cell integrated with a
An Innovative Fabrication Process of Porous Metal Fiber Sintered Felts with Three-Dimensional Reticu
Effects of structural parameters on the performance of a micro-reactor with micro-pin-fin arrays (MP
Influence of microstructures on wettability on stainless steel
Compressive properties of porous metal fiber sintered sheet produced by solid-state sintering proces
Effects of superimposed high-frequency vibration on deformation of aluminum in micro/meso-scale upse
Cr-N-C multilayer film on 316L stainless steel as bipolar plates for proton exchange membrane fuel c
Study on operational aspects of a passive direct methanol fuel cell incorporating an anodic methanol
Trend prediction in velocity distribution among microchannels based on the analysis of frictional re
Preparation of current collector with blind holes to enhance cycle performance of silicon-based
Numerical simulation of velocity distribution among microchannels with bifurcation structures as man
Fabrication and characteristics of cube-post microreactors for methanol steam reforming
Surface treatment of 3D outside serrated integral-fin tube manufactured by rolling and extrusion
Burr formation in milling cross-connected microchannels with a thin slotting cutter
Dominance evaluation of structural factors in a passive air-breathing direct methanol fuel cell base
Low temperature solid-phase sintering of sintered metal fibrous media with high specific surface are
热柱复合毛细芯的成形工艺及其优化
Oriented linear cutting fiber sintered felt as an innovative catalyst support for methanol steam ref
表面功能结构制造研究进展
Feasibility study of porous copper fiber sintered felt: A novel porous flow field in proton exchange
Ring-shaped microchannel heat exchanger based on turning process
Effects of structural aspects on the performance of a passive air-breathing direct methanol fuel cel
Electrical-assisted embossing process for fabrication of micro-channels on 316L stainless steel plat
Development and characterization of multilayered Cr-C/a-C:Cr film on 316L stainless steel as bipolar
Study on Shape Error Effect of Metallic Bipolar Plate on the GDL Contact Pressure Distribution in Pr
Performance improvement of wave-like PEMFC stack with compound membrane electrode assembly
Optimum design of the slotted-interdigitated channels flow field for proton exchange membrane fuel c
Experimental study of electrical resistivity and flow stress of stainless steel 316L in electroplast
Study on a novel electrical-assisted pressure welding process of thin metallic foils.
A micro-reactor with micro-pin-fin arrays for hydrogen production via methanol steam reforming
Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Material
Chatter suppression by parametric excitation: Model and experiments
Acoustic softening and hardening in aluminum: Modeling and experiments
A Friction Evaluation Method Based on Barrel Compression Test
Effect of tip clearance on the heat transfer and pressure drop performance in the micro-reactor with
Modeling and analysis of flow distribution in an A-type microchannel reactor
Acoustic softening and hardening of aluminum in high-frequency vibration-assisted micro/meso Forming
An Experimental Study on Micro Thixoforming Processing Parameters for Reaction Plate with Micro-Pin-
Experimental Study on the Reheating Process for A356 Alloy in Thixoforming
Measure and Control System of an Onboard Micro-Channel Reactor for Hydrogen Production via Methanol
微凸台阵列型重整微反应器的传热传质特性研究
半固态A356铝合金微凸台阵列触变成形充型过程数值模拟
Factors influencing methanol steam reforming inside the oriented linear copper fiber sintered felt
Qualitative investigation on effects of manifold shape on methanol steam reforming for hydrogen prod
Porous metal materials for polymer electrolyte membrane fuel cells - A review
Porous Metal-Fiber Sintered Felt by Multi-Tooth Cutting and Sintering-Morphological Analysis and Mec
Characterization of electrical conductivity of porous metal fiber sintered sheet using four-point pr
Characteristics and mechanism of top burr formation in slotting microchannels using arrayed thin slo
Modeling of microchannel hydroforming process with thin metallic sheets
Toward Fully- and Semi-passive Operation of a Liquid-Fed Direct Methanol Fuel Cell
Toward using porous metal-fiber sintered plate as anodic methanol barrier in a passive direct methan
Optimization of Catalyst Loading for Porous Copper Fiber Sintered Felts Used in Methanol Steam Refor
Micro/meso roll-to-plate (R2P) imprinting process to fabricate micro channel/riblet features
Manufacture, characterization and application of porous metal-fiber sintered felt used as mass-trans
Numerical Modelling & Elestomeric Gasket Design for PEMFC Stacks
On the processing and morphological aspects of metal fibers based on low-speed multi-tooth dry cutti
Fabrication and testing of phase change heat sink for high power LED
微细辊对平板辊压成形工艺建模与尺度效应分析
交错互通微通道多孔网格板的力学性能研究
不同参数对复合毛细芯热柱传热性能的影响
微凸台阵列型重整微反应器的传热传质特性
复合毛细芯热柱传热极限的建模方法及实验研究
直流式低速风洞收缩段收缩曲线的仿真分析
紧急制动工况下汽车通风盘式制动器瞬态温度场分布的研究
基于流固耦合的直接虚拟区域法离散δ函数研究
基于遗传算法优化的BP神经网络的PEMFC动态特性仿真研究
盲孔铜集流体制备及其对硅基阳极循环性能的改善(英文)
期刊信息
  • 《中国表面工程》
  • 中国科技核心期刊
  • 主管单位:中国科学技术协会
  • 主办单位:中国机械工程学会
  • 主编：刘世参
  • 地址：北京市丰台区杜家坎21号（装甲兵工程学院内）
  • 邮编：100072
  • 邮箱：cse1988@csejournal.com
  • 电话：010-66719325/584
  • 国际标准刊号：ISSN：1007-9289
  • 国内统一刊号：ISSN：11-3905/TG
  • 邮发代号:82-916
  • 获奖情况:
  • 属中国期刊方阵"双效"期刊,获第三届中国科协优秀期刊奖,精品期刊示范项目
  • 国内外数据库收录:
  • 俄罗斯文摘杂志,美国化学文摘（网络版）,波兰哥白尼索引,美国工程索引,美国剑桥科学文摘,中国中国科技核心期刊,中国北大核心期刊（2008版）,中国北大核心期刊（2011版）,中国北大核心期刊（2014版）
  • 被引量:6072