位置：成果数据库 > 期刊 > 期刊详情页
Forming characteristics of thin-wall steel parts by double electrode GMAW based additive manufacturi
  • ISSN号：0924-0136
  • 期刊名称：Journal of Materials Processing Technology
  • 时间：2016
  • 页码：153-160
  • 相关项目：超高强钢大厚板非对称双面双热源多重加热作用下组织和应力演变规律及不预热焊接工艺研究
作者： Dongqing Yang|Chenjian He|Guangjun Zhang|
同期刊论文项目
超高强钢大厚板非对称双面双热源多重加热作用下组织和应力演变规律及不预热焊接工艺研究
期刊论文 24 会议论文 2 获奖 2 著作 1
同项目期刊论文
Active Droplet Oscillation Excited by Optimized Waveform
Three-dimensional finite element analysis of thermal stress in single-pass multi-layer weld-based ra
大厚板双面双TIG电弧打底焊熔池成形特性
Bead geometry prediction for robotic GMAW-based rapid manufacturing through a neural network and a s
Comparison of residual stress in equal matching and undermatching weld joints of the high strength s
Adaptive Control of Deposited Height in GMAW-based Layer Additive Manufacturing
NUMERICAL SIMULATION OF TEMPERATURE FIELD AND STRESS DISTRIBUTIONS IN MULTI-PASS SINGLE-LAYER WELD-B
Reconstruction of Emission Coefficients for a Non-axisymmetric Coupling Arc Based on MALDONADO'
Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW
Effect of process parameters on temperature distribution in twin-electrode TIG coupling arc
Microstructures and hardness of flat-overhead weld of the high strength steel thick plate using doub
坡口预留间隙对高强度钢厚板打底焊缝成形的影响
Thermal cycle and microstructure of backing weld in double-sided TIG arc horizontal welding of high-
厚板双TIG 打底焊缝根部熔合的数值模拟
Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision
Vision-sensing and bead width control of a single-bead multi-layer part: material and energy savings
Effects of interpass idletime on thermal stressesin multipass multilayerweld-based rapid prototyping
基于Surface Evolver 的小电流CO2焊熔滴自由过渡的数值模拟
10Ni5CrMoV钢错位同步双面双弧焊接接头抗低温脆断性能
基于SurfaceEvolver的小电流CO2焊熔滴自由过渡的数值模拟
厚板双TIG打底焊缝根部熔合的数值模拟