位置：成果数据库 > 期刊 > 期刊详情页
On the interface and mechanical property of Ti/Al–6%Cu–0.5%Mg–0.4%Ag bimetal composite produced by c
  • ISSN号：0167-577X
  • 期刊名称：Materials Letters
  • 时间：2012.5.1
  • 页码：89-92
  • 相关项目：Al-Cu-Mg合金抗疲劳的溶质原子团簇尺寸效应机理
作者： Zhiyi Liu|Peng Xia|Mao Lin|Sumin Zeng|
同期刊论文项目
Al-Cu-Mg合金抗疲劳的溶质原子团簇尺寸效应机理
期刊论文 25 专利 2
同项目期刊论文
Effects of Severe Cold Rolling on Exfoliation Corrosion Behavior of Al-Zn-Mg-Cu-Cr Alloy
Severe plastic deformation-induced dissolution of θ" particles in Al–Cu binary alloy and subseq
Reprecipitation behavior in Al–Cu binary alloy after severe plastic deformation-induced dissolution
Effects of Pre-Strain on Exfoliation Corrosion Behavior in Al-Cu-Mg Alloy
Enhanced Fatigue Crack Propagation Resistance in an Al-Zn-Mg-Cu Alloy by Retrogression and Reaging T
Transition of crack propagation from a transgranular to an intergranular path in an overaged Al-Zn-M
The influence of various Ag additions on the nucleation and thermal stability of Omega phase in Al-C
Deform~(TM)有限元模拟在2A42/2%TiB_2复合材料热压缩变形组织演变研究中的应用
Fe和Ni对Al-Cu-Mg-Ag耐热合金组织和高温力学性能的影响
2099铝锂合金均匀化退火的微观组织及Al3Zr析出分析
预变形对Al-3.7Cu-1.6Mg合金断裂韧性的影响
Mg-controlled formation of Mg–Ag co-clusters in initial aged Al–Cu–Mg–Ag alloys
Analysis of modulus hardening in an artificial aged Al–Cu–Mg alloy by atom probe tomography
Growth of Omega Plates and Its Effect on Mechanical Properties in Al-Cu-Mg-Ag Alloy with High Conten
Stress-induced thickening of Ω phase in Al–Cu–Mg alloys containing various Ag additions
Effects of germanium on quench sensitivity in Al–Zn–Mg–Zr alloy
Solute cluster size effect on the fatigue crack propagation resistance of an underaged Al–Cu–Mg allo
Atom probe tomography study of Mg-dependent precipitation of Ω phase in initial aged Al-Cu–Mg–Ag all
Effects of Ag variations on the microstructures and mechanical properties of Al–Cu–Mg alloys at elev
Mechanisms for Goss-grains induced crack deflection and enhanced fatigue crack propagation resistanc
Al-5.7Cu-0.4Mg-1.2Ag合金的时效析出行为
化学镀Ni-B镀层对Al-Cu-Mg合金组织和腐蚀性的影响
微量Sc，Er对Al-Cu-Mg-Zr合金铸态组织的影响
新型Al-Cu-Li合金时效过程中组织和性能的变化研究