欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
For researching the residual stress distribution characteristics of the different large thickness titanium alloy joints by electron beam welding,under heat treatment or non-heat treatment conditions,the changes in residual stress distribution characteristics of electron beam welding joints,which thickness is 50 mm,were measured using blind-hole method with local layer-by-layer removal.Effect of post-welding heat treatment on the residual stress distribution also studied.The results show that blind-hole method with local layer-by-layer removal is suitable to measure residual stresses in thick plate,and good to reflect the welded residual stress distribution of large gradient.Residual stress of the test samples in the weld and heat affected zone has high stress level,and internal stress dramatic changes with thickness in this areas.After heat treatment,the samples’ stress distributions were significantly reduced.The samples’ transverse and longitudinal residual stress are basically the same.Homogenization is obvious.
同期刊论文项目
同项目期刊论文
Fracture assessment for electron beam welded damage tolerant Ti-6Al-4V alloy using the FITNET proced
Microstructure and properties of EBW and heat treatment with multi-beam technology for nearαtitanium
Effect of electron beam welding on the microstructures and mechanical properties of thick TC4-DT all
Study on the J-integral and failure assessment line of electron beam welded thick TC4-DT alloy joint
Microstructures and fatigue properties of electron beam welds with beam oscillation for heavy sectio
Investigation of microstructure and mechanical performance of joints by hybrid electron beam welding
期刊信息
位置：