位置：成果数据库 > 期刊 > 期刊详情页
高效连铸结晶器冶金过程控制关键技术探讨
  • ISSN号：1005-4006
  • 期刊名称：《连铸》
  • 时间：0
  • 分类：TG249.7[金属学及工艺—铸造]
  • 作者机构：[1]东北大学
  • 相关基金：国家自然科学基金委;国家杰出青年科学基金(50925415)
作者： 朱苗勇[1]
关键词： 高效连铸, 结晶器, 关键技术, High efficiency continuous casting, continuous casting mold, key technologies
中文摘要：

结合东北大学冶金过程仿真与智能控制研究组的最近研究成果,就涉及高效连铸的结晶器冶金理论及控制技术,如钢水流动行为及控制、凝固坯壳生长行为及控制、铜板热变形行为及控制、结晶器润滑机制及控制等进行分析与探讨。

英文摘要：

结合东北大学冶金过程仿真与智能控制研究组的最近研究成果,就涉及高效连铸的结晶器冶金理论及控制技术,如钢水流动行为及控制、凝固坯壳生长行为及控制、铜板热变形行为及控制、结晶器润滑机制及控制等进行分析与探讨。

同期刊论文项目
高品质钢精炼与连铸过程基础理论与应用
期刊论文 43 会议论文 42 专利 17
同项目期刊论文
Three-Dimensional Magnetohydrodynamic Calculation for Coupling Multiphase Flow in Round Billet Conti
Heat Transfer and Deformation Behavior of Shell Solidification in Wide and Thick Slab Continuous Cas
Simulation of Air Gap Formation in Slab Continuous Casting Mould
Determination of the dynamic recrystallization kinetics model for SCM435 steel
Numerical Simulations of Inclusion Behavior in Gas-Stirred Ladles
Multiphase Flow and Thermo-Mechanical Behaviors of Solidifying Shell in Continuous Casting Mold
Effect of cooling structure on thermal behavior of copper plates of slab continuous casting mold
Numerical Simulation of Solidification Structure of High Carbon Steel in Continuous Casting Using Ce
冷却结构对连铸结晶器铜板应力分布的影响
板坯连铸结晶器内钢凝固过程热行为研究 Ⅰ.数学模型
Mechanism of explaining liquid friction and flux consumption during non-sinusoidal oscillation in sl
板坯连铸结晶器内钢凝固过程热行为研究 Ⅱ.模型验证与结果分析
连铸大方坯轻压下过程的变形行为
Physical Modeling of Inclusion Behavior in 100 t RH Degasser
Physical modeling of gas-liquid interfacial fluctuation in a thick slab continuous casting mold with
Control Model of Bloom Dynamic Soft Reduction
Numerical Analysis of Electromagnetic Field and Flow Field in High Casting Speed Slab Continuous Cas
Numerical Simulation of Gas and Liquid Two-Phase in Gas-Stirred Systems Based on Euler–Euler A
Numerical Simulations of Inclusion Behavior and Mixing Phenomena in Gas-stirred Ladles with Differen
Thermo-mechanical Behavior of Peritectic Steel Solidifying in Slab Continuous Casting Mold and A New
Improvement of centerline segregation in continuously cast billets of high Carbon steel by combinati
Analysis and Application of Soft Reduction Amount for Bloom Continuous Casting Process
Study on mechanism of mould powder entrapment in funnel type mould of flexible thin slab casting mac
The Heat Transfer and Central Segregation of Continuous Casting High Carbon Steel Billet
Non-uniform heat transfer behavior during shell solidification in a wide and thick slab continuous c
Experimental Study on Mold Flux Lubrication for Continuous Casting
Effect of transverse distribution of secondary cooling water on corner cracks in wide thick slab con
包晶钢宽厚板坯连铸结晶器的热流密度与热行为
方坯连铸凝固末端电磁搅拌工艺优化的数值模拟
A two-dimensional model for the quantitative simulation of the dendritic growth with cellular automa
宽厚板坯连铸二冷工艺开发与应用
碳钢连铸凝固过程的微观模拟
冷却结构对连铸结晶器铜板热变形的影响
振动结晶器内凝固前沿初始裂纹形成力学扰动分析
新型连铸结晶器冷却结构的铜板热-力学行为
Effect of cooling structure on thermal behavior of copper plates of slab continuous casting mold
Non-uniform heat transfer behavior during shell solidification in a wide and thick slab continuous casting mold
期刊信息
  • 《连铸》
  • 主管单位:中国科学技术协会
  • 主办单位:中国金属学会 北京钢研柏苑出版有限责任公司
  • 主编：包燕平
  • 地址：北京市海淀区学院南路76号
  • 邮编：100081
  • 邮箱：lianzhubianjibu@163.com
  • 电话：010-62183313
  • 国际标准刊号：ISSN：1005-4006
  • 国内统一刊号：ISSN：11-3385/TG
  • 邮发代号:
  • 获奖情况:
  • 国内外数据库收录:
  • 被引量:1733