位置：成果数据库 > 期刊 > 期刊详情页
Fabrication of bulk ultrafine grained titanium alloy via equal channel angular pressing based thermo
  • ISSN号：0261-3069
  • 期刊名称：Materials & Design
  • 时间：2013.4
  • 页码：889-894
  • 相关项目：梯度结构的FGH4096合金混晶层的微观组织演化
作者： Yan Zhao|Hongzhen Guo|M.W. Fu|Yongquan Ning|Zekun Yao|
同期刊论文项目
梯度结构的FGH4096合金混晶层的微观组织演化
期刊论文 44 会议论文 1 专利 9 著作 1
同项目期刊论文
Dynamic recrystallization behavior of Ti-5Al-5Mo-5V-1Cr-1Fe alloy
Discontinuous yielding in Ni-base superalloys during high-speed deformation
Hot deformation behavior of Ti-5.0Al-2.40Sn-2.02Zr-3.86Mo-3.91Cr alloy with an initial lamellar micr
Constitutive equations for high temperature flow stress of TC4-DT alloy incorporating strain, strain
Hot deformation behavior of the 1.15C-4.00Cr-3.00V-6.00W-5.00Mo powder metallurgy high speed steel
Study on the hot deformation behavior of TC4-DT alloy with equiaxed α+β starting structure based on
表面纳米化对金属材料耐磨性的影响
FGH4096粉末高温合金的再结晶形核机制
Recrystallization of the hot isostatic pressed nickel-base superalloy FGH4096: I. Microstructure and
304不锈钢四通件热挤压成形规律研究
Structure evolving at bonding interface of dual-alloys jointed withdifferent method under coupling a
热加工工艺对医用TC20合金显微组织的影响
不同颗粒级配电熔刚玉对多孔氧化铝基陶瓷型芯性能的影响
GH690合金大型管材挤压成形参数优化
Hot deformation behavior of the 1.15C–4.00Cr–3.00V–6.00W–5.0
6061 铝合金异形管材分流挤压模拟研究与优化
FGH4096粉末高温合金的热变形行为
Flow behavior and constitutive model for Ni-20.0Cr-2.5Ti-1.5Nb-1.0Al superalloy compressed below gam
Hot deformation behavior of GH4169 superalloy associated with stick 8 phase dissolution during isoth
Recrystallization nucleation mechanism of fgh4096 powder metallurgy superalloy
The flow behavior and constitutive equation in isothermal compression of FGH4096-GH4133B dual alloy
热处理对粉末高温合金不均匀变形的改善作用
Hot deformation behavior of the post-cogging FGH4096 superalloy with fine equiaxed microstructure
Effect of isothermal deformation on microstructure and properties of electron beam welded joint of T
Hot deformation behavior of Ti–6.0Al–7.0Nb biomedical alloy by using processing
微惯性测量单元的标定技术研究
Structural-gradient-materials produced by gradient temperature heat treatment for dual-property turb
Hot deformation behavior and hot working characteristic of Nickel-base electron beam weldments
304 不锈钢管材挤压金属损伤规律仿真研究
Flow behavior and hot workability of FGH4096 superalloys with different initial microstructures by u
Hot deformation behavior of Ti-6.0Al-7.0Nb biomedical alloy by using processing map
A method to determine main microstructural features influencing mechanical properties of two-phase t
Dynamic recrystallization of wrought–solidified–wrought complex structure in Ni-Based superalloys
Recrystallization of the hot isostatic pressed nickel-base superalloy FGH4096. II: Characterization
生物医用TC20钛合金高温变形行为及本构关系
FGH96高温合金的再结晶组织特征
TC4-DT钛合金两种不同预处理状态下的β晶粒等温长大动力学
FGH4096/GH4133B双合金高温变形的动态软化行为
热力耦合作用下粉末高温合金的峰值应力与临界应变模型研究
TC4-DT钛合金热机械处理后的组织特征和力学性能
“粉冶-铸-锻”复合结构的塑性变形与微观组织
FGH4096-GH4133B双合金高温变形的本构关系