位置：成果数据库 > 期刊 > 期刊详情页
A method to determine main microstructural features influencing mechanical properties of two-phase t
  • ISSN号：0921-5093
  • 期刊名称：Materials Science and Engineering A-Structural Mat
  • 时间：2014.8.12
  • 页码：136-141
  • 相关项目：梯度结构的FGH4096合金混晶层的微观组织演化
作者： Shi, Zhifeng|Guo, Hongzhen|Qin, Chun|Liang, Houquan|Yao, Zekun|
同期刊论文项目
梯度结构的FGH4096合金混晶层的微观组织演化
期刊论文 44 会议论文 1 专利 9 著作 1
同项目期刊论文
Dynamic recrystallization behavior of Ti-5Al-5Mo-5V-1Cr-1Fe alloy
Discontinuous yielding in Ni-base superalloys during high-speed deformation
Hot deformation behavior of Ti-5.0Al-2.40Sn-2.02Zr-3.86Mo-3.91Cr alloy with an initial lamellar micr
Constitutive equations for high temperature flow stress of TC4-DT alloy incorporating strain, strain
Hot deformation behavior of the 1.15C-4.00Cr-3.00V-6.00W-5.00Mo powder metallurgy high speed steel
Study on the hot deformation behavior of TC4-DT alloy with equiaxed α+β starting structure based on
表面纳米化对金属材料耐磨性的影响
FGH4096粉末高温合金的再结晶形核机制
Recrystallization of the hot isostatic pressed nickel-base superalloy FGH4096: I. Microstructure and
304不锈钢四通件热挤压成形规律研究
Structure evolving at bonding interface of dual-alloys jointed withdifferent method under coupling a
热加工工艺对医用TC20合金显微组织的影响
不同颗粒级配电熔刚玉对多孔氧化铝基陶瓷型芯性能的影响
GH690合金大型管材挤压成形参数优化
Hot deformation behavior of the 1.15C–4.00Cr–3.00V–6.00W–5.0
6061 铝合金异形管材分流挤压模拟研究与优化
FGH4096粉末高温合金的热变形行为
Flow behavior and constitutive model for Ni-20.0Cr-2.5Ti-1.5Nb-1.0Al superalloy compressed below gam
Hot deformation behavior of GH4169 superalloy associated with stick 8 phase dissolution during isoth
Recrystallization nucleation mechanism of fgh4096 powder metallurgy superalloy
Fabrication of bulk ultrafine grained titanium alloy via equal channel angular pressing based thermo
The flow behavior and constitutive equation in isothermal compression of FGH4096-GH4133B dual alloy
热处理对粉末高温合金不均匀变形的改善作用
Hot deformation behavior of the post-cogging FGH4096 superalloy with fine equiaxed microstructure
Effect of isothermal deformation on microstructure and properties of electron beam welded joint of T
Hot deformation behavior of Ti–6.0Al–7.0Nb biomedical alloy by using processing
微惯性测量单元的标定技术研究
Structural-gradient-materials produced by gradient temperature heat treatment for dual-property turb
Hot deformation behavior and hot working characteristic of Nickel-base electron beam weldments
304 不锈钢管材挤压金属损伤规律仿真研究
Flow behavior and hot workability of FGH4096 superalloys with different initial microstructures by u
Hot deformation behavior of Ti-6.0Al-7.0Nb biomedical alloy by using processing map
Dynamic recrystallization of wrought–solidified–wrought complex structure in Ni-Based superalloys
Recrystallization of the hot isostatic pressed nickel-base superalloy FGH4096. II: Characterization
生物医用TC20钛合金高温变形行为及本构关系
FGH96高温合金的再结晶组织特征
TC4-DT钛合金两种不同预处理状态下的β晶粒等温长大动力学
FGH4096/GH4133B双合金高温变形的动态软化行为
热力耦合作用下粉末高温合金的峰值应力与临界应变模型研究
TC4-DT钛合金热机械处理后的组织特征和力学性能
“粉冶-铸-锻”复合结构的塑性变形与微观组织
FGH4096-GH4133B双合金高温变形的本构关系