位置：成果数据库 > 期刊 > 期刊详情页
熔池传热与流动的非定常数值模拟
  • 期刊名称：热科学与技术
  • 时间：0
  • 作者或编辑：3448
  • 页码：2002.09,1 (1), 42-45
  • 语言：中文
  • 相关项目：高能束流表面加工与处理的超常热物理问题
作者： 王海兴|陈 熙|
同期刊论文项目
高能束流表面加工与处理的超常热物理问题
期刊论文 82
同项目期刊论文
压-剪复合应力波作用下材料动态断裂韧性研究
激光穿透焊的三维数值模拟
激光穿透焊的数值模拟研究
激光熔覆粉末MoSi2涂层的组织结构和性能
激光熔覆MoSi2涂层的研究
Importance of Marangoni convection in laser full-penetration welding
Electron beam surface remelting of AISI D2 cold-worked die-steel Surface
超声相控阵成像技术与应用
带有相变的三维温度场数值模拟
Three-dimensional modelling of heat transfer and fluid flow in laser full-penetration welding
激光加热熔池流动与传热的分区数值模拟
自由燃烧电弧中传热与流动的数值模拟
不锈钢等离子弧焊熔池小孔行为的弧光传感研究
Modelling of laminar plasma jet impinging on a flat plate with approximate box relaxation method
The development of rapidly solidified microstructure in SiCp/A356 composites subjected to laser beam
铁基抗高温磨损激光熔覆涂层强韧设计与研究（II）
铁基合金激光熔覆组织及高温时效的TEM研究
Microstructure and wear resistance of in situ TiCp composite coating by laser cladding
Microstructural features of an iron-based laser coating
脉冲激光离散熔凝加工的熔池几何形态研究
Thermophoretic velocity of a small non-evaporating or evaporating particlein a high-temperature diat
Rapidly solidified nonequilibrium microstructure and phase transformation of laser-synthesizediron-b
Nonequilibrium Microstructures and their Evolution in a Fe-Cr-W-Ni-C laser clad coating
On the correct form of the two-temperature plasma
Spectrographic analysis of laser induced plasma in process of high power laser welding
Al2O3 颗粒对Al-Zn 合金激光快凝组织的影响
Microstructural characteristics of TiC-reinforced composites coating produced by laser syntheses
Nonequilibrium microstructure and phase evolutions of an iron-based laser clad coating
The thermophoretic force acting on a small particle suspended in thenear-wall region of a low-pressu
In situ formation by laser cladding of a TiC composite coating with a gradient distribution
铁基抗高温磨损激光熔覆涂层强韧设计和研究（I）
Influence of SiC particulates on grain structure development of an aluminum 7075 alloy during laser
激光熔凝加工瞬时温度场及残余应力数值模拟
穿孔等离子弧焊正面弧光传感技术研究
Modeling of subsonic-supersonic flowand heat transfer in a D. C. arc plasmatorch
Effect of SiC particles on crystal growth of Al-Si alloy during laser rapid solidification
Microstructure evolution of a laser-cladded coating
热障涂层界面微结构尺寸与残余应力关系的数值模拟
A note on the solution of conjugate heat transfer problems with SIMPLE-like algorithms
原位SiC颗粒增强MoSi2复合材料的显微组织与力学性能
喷射成形铝合金的激光表面致密化
电子束深穿透熔质密度分布与熔池流动行为研究
穿孔等离子弧焊发展历史与现状
氧化铝基板与Cu和Al的接合及其表面改质效果
Heat flux characteristics of DC laminar plasma jets impinging on a flat plate at atmospheric pressur
A calculation model for the evaporation recoil pressure in laser materials processing
Diffusion in two-temperature partially ionized gases
激光作用下SiCp/A356复合材料的快凝组织形成
Heat transfer and fluid flow in a high-intensity free-burning arc: an improved modeling approach
Three-dimensional simulation of a plasma jet with transverse particle and carrying-gas injection
Modeling of the supersonic argon plasma jet at low gas pressure environment
Three-dimensional modeling of a D.C. non-transferred arc plasma torch
等离子体反应器中传热与流动的三维数值模拟
自由分子流区近壁蒸发与未蒸发颗粒的热泳分析
Generation of long, laminar plasma jets at atmospheric pressure and effects of flow turbulence
Front side keyhole detection in plasma arc welding of stainless steel
界面形貌对热障涂层界面残余应力影响的数值模拟
The thermophoretic force acting on a cylinder or a flat plate immersed in a plasma flow at great Knu
激光和电子束表面强化技术的发展与应用
大功率激光焊接光致等离子体的光谱分析
Grain structure of laser remelted 7075 aluminium alloy in the presence of Al2O3 particles
PAW 过程弧光传感技术研究
3-dimensional variable-property modeling of the laser full-penetration welding characteristics
An Application of Ultrasound Phased Arrays Imaging in Electron Beam Welding Inspection
Three-dimensional modelling of the flow and heat transfer in a laminar non-transferred arc plasma to
Three-dimensional modeling of the trubulent plasma jet impinging upon a flat plate and with transver
Electron beam surface treatment. Part I:surface hardening of AISI D3 tool steel
Electron beam surface treatment. PartII: microstructure evolution of stainless steel and aluminum al
激光推进的初步数值模拟研究
材料力学性能的激光调控（邀请报告）
用能量平衡法确定激光焊接熔池尺寸
激光硬化基体对镀铬层组织和结合的影响
SiC颗粒对Al-Zn合金激光快凝晶粒组织的影响
激光加热熔池流动的数值模拟
激光加热过程中稳态等温相变的数值模拟
Modelling of Laminar Plasma Jet Impinging on a Flatplate with Approximate Box Relaxation Method