位置:成果数据库 > 期刊 > 期刊详情页
双金属复合板爆炸焊接窗口研究
  • 期刊名称:科学技术与工程
  • 时间:0
  • 页码:1126-1128
  • 语言:中文
  • 分类:TM912.9[电气工程—电力电子与电力传动]
  • 作者机构:[1]南京理工大学,江苏南京210094
  • 相关基金:瞬态物理国家重点实验室基金(9140C3008030806);兵器预研基金(62301110510):国家自然科学基金(10802038)和南京理工大学“百名优秀青年教师培养计划”
  • 相关项目:铜板-铜粉双层复合板的爆炸压涂研究
作者: 赵铮|
中文摘要:

用爆炸压实法制备了非晶颗粒增强铝基复合材料,复合材料中增强相非晶颗粒的含量分别为5%,10%,15%和20%。XRD和DTA分析的结果表明,爆炸压实过程中非晶颗粒未发生晶化现象。SEM分析的结果表明,非晶颗粒在基体中分布均匀。对爆炸压实件的硬度、密度、强度进行了检测,结果表明,该复合材料的强度高于纯铝,随着非晶颗粒含量的增加,复合材料的硬度和强度呈增大趋势。

英文摘要:

Metallic glass particles-reinforced Al based MMCs without mach hole, cracking and obvious defects were fabricated successfully by explosive compaction of powders. The mass fractions of the amorphous phase are 5%, 10%, 15% and 20% in the experiment. XRD and DTA analysis of the composite specimens show that the amorphous phase is maintained in the composites without crystallization during the compaction. Furthermore the SEM micrographs of the composites show that the metallic glass particles are randomly distributed in the matrix. Compared to the monolithic AI, the composites have higher Rockwell hardness and yield strength which is proportional to the mass fraction of metallic glass reinforcement phase.

同期刊论文项目
同项目期刊论文