位置：成果数据库 > 期刊 > 期刊详情页
Effect of Cooling Rate on Solidification Microstructures in AISI 304 Stainless Steel
  • 时间：0
  • 相关项目：钢亚快速凝固机理、控制方法及对材料性能的影响
同期刊论文项目
钢亚快速凝固机理、控制方法及对材料性能的影响
期刊论文 29 会议论文 6
同项目期刊论文
冷却速率对奥氏体不锈钢凝固过程影响的原位观察
薄带连铸AISI304不锈钢中铁素体行为
The Effect of Oxygen Partial Pressure on Heat Transfer and Solidification
Microstructural Evolution in AISI 304 Stainless Steel during Directional Solidification and Subseque
Microstructure Formation in Rapidly Solidified AISI 304 Stainless Steel Strip
熔体过热对AISI 304不锈钢亚快速凝固薄带组织的影响
双辊薄带连铸柱状晶组织模拟
Formation of a two-phase microstructure in Fe-Cr-Ni alloy during directional solidification
Non-metallic Inclusion in AISI304 Strip Produced by Twin-roll Strip Casting
双辊薄带连铸304不锈钢铸带表面横裂纹成因研究
夹杂物在钢液凝固前沿行为的原位动态观察研究
Formation of Two-phase Coupled Microstructure in AISI 304 Stainless Steel during Directional Solidif
Microstructure Evolution in AISI 304 Stainless Steel during Near-rapid Directional Solidification
薄带连铸304不锈钢凝固过程中生成的氧化物夹杂
双辊薄带连铸304不锈钢中非金属夹杂物研究
双辊连铸不锈钢薄带内部质量缺陷的研究
蒋国荣，俞永强，何金海
In-situ Observation of Solidification Process of AISI304 Austenitic Stainless Steel
双辊连铸304不锈钢2.0mm薄带中铁素体的形态与分布
AISI304不锈钢加热过程中高温δ相形核与生长的原位观察
双辊薄带连铸0Cr18Ni9不锈钢的直接冷轧研究
双辊薄带连铸啮合点前流动与凝固特征分析
双辊薄钢带-铸辊界面热流特征的研究进展
双辊薄带连铸过程与凝固组织多场耦合数学模型
AISI304不锈钢熔化过程中夹杂物在固-液糊状区漂移与聚集行为的原位观察
共焦激光扫描显微镜在冶金中的应用
Investigation of the solute transportation coupled with heat transfer and fluid flow during twin-roll strip casting process
Microstructure of AISI 304 stainless steel strips produced by a twin-roll caster