位置：成果数据库 > 期刊 > 期刊详情页
超重力辅助燃烧合成Y2O3-Al2O3-SiO2玻璃/Y3Al5O12陶瓷梯度复合材料
  • ISSN号：1005-023X
  • 期刊名称：《材料导报》
  • 时间：0
  • 分类：TB333[一般工业技术—材料科学与工程]
  • 作者机构：[1]北京科技大学材料科学与工程学院,北京100083, [2]中国科学院理化技术研究所,北京100190
  • 相关基金：国家自然科学基金（51002163;50932006）;北京市自然科学基金（2112043）
作者： 杨增朝[1], 徐育[1], 郭世斌[2], 徐利华[1], 刘光华[2], 李江涛[2]
关键词： 超重力, 燃烧合成, YAS玻璃, YAG陶瓷, 复合材料, high gravity, combustion synthesis, YAS glass, YAG ceramics, composite materials
中文摘要：

以超重力场辅助燃烧合成技术制备了呈梯度分布的Y2O3-Al2O3-SiO2玻璃／Y3Al5O12陶瓷梯度复合材料。结果表明，梯度布置两种组分的原料既可防止下层熔体的喷溅，又能提高上层玻璃的透过率。该梯度材料沿超重力方向依次为YAS透明玻璃层、YAS-YAG玻璃陶瓷层和YAG陶瓷层。

英文摘要：

Gradient Y2O3-Al2O3-SiO2 Glass/Y3Al5O12 ceramic composite materials were prepared by comhus- tion synthesis under high gravity. Anti spraying gradient arrangement of raw powders could prevent lower melt spray and improve the transmittance of the YAS glass at the same time. The composite contain YAS transparent glass, YAS-YAG glass ceramic and YAG ceramic along the high gravity direction.

同期刊论文项目
以超重力熔铸新技术制备透明陶瓷材料的应用基础研究
期刊论文 64 专利 9 著作 3
　超重力燃烧合成熔铸稀土铝酸盐透明玻璃陶瓷
期刊论文 2
非晶晶化制备Ce-YAG纳米晶透明荧光陶瓷的研究
期刊论文 14
同项目期刊论文
Controlled amorphous crystallization: An easy way to make transparent nanoceramics
Effects of temperature and holding time on bonding W and W–Cu composites with an amorphous W–Fe coat
Bonding W and W–Cu composite with an amorphous W–Fe coated copper foil through hot pressing method
Melt-casting of Si–Al–Y–O glasses and glass-ceramics by combustion synthesis under high gravity
Fabrication of transparent LaAlO3/t-ZrO2 nanoceramics through controlled amorphous crystallization
High-gravity combustion synthesis and in situ melt infiltration: A new method for preparing cemented
High-gravity combustion synthesis: A fast and furnace-free way for preparing bulk ceramic materials
Preparation of Y2O3–Al2O3–SiO2 glasses by combustion synthesis melt–casting under high gravity
Melt-casting of Y3Al5O12 (YAG) ceramics by combustion synthesis under high gravity with the addition
Preparation of single-phase magnesium silicon nitride powder by a two-step process
Combustion synthesis of refractory and hard materials: A review
Combustion Synthesis of SiAlON Ceramic Powders: A Review
Facile thermal explosion synthesis and optical properties of Al-doped flatted 3C-SiC microcrystals w
Preparation of infrared transparent YAG-based glass-ceramics with nano-sized crystallites
Combustion synthesis of (TiC plus SiC) composite powders by coupling strong and weak exothermic reac
Fabrication of nanostructure Al2O3/ZrO2 (Y2O3) eutectic by combustion synthesis melt-casting under u
Investigation of isothermal and no-isothermal oxidation of SiC powder using an analytic kinetic mode
Combustion synthesis of high porosity SiC foam with nanosized grains
Enhanced Dielectric Constant for Efficient Electromagnetic Shielding Based on Carbon-Nanotube-Added
Combustion synthesis of porous TiC/Ni composites under high gravity
Growth mechanism of crystalline SiAlON microtubes prepared by combustion synthesis
Highly dense beta-SiC ceramics with submicron grains prepared by sintering of nanocrystalline powder
Effect of reaction atmosphere on combustion synthesis of Ti2AlN
Melt-Casting of Translucent MgAl2O4 Ceramics by Combustion Synthesis Under High Gravity
Phase separation in melt-casting of ceramic materials by high-gravity combustion synthesis
Eu~(3+)掺杂Y_2O_3-Al_2O_3-SiO_2玻璃的制备与荧光性能研究
超重力熔铸快速致密化技术制备YAG陶瓷材料的研究
铝热剂燃烧合成Y_3Al_5O_(12)块体材料传热过程的模拟与验证
超重力场辅助燃烧合成技术快速制备Fe_3Al合金
超重力辅助燃烧合成熔渗梯度Ni-(WC-Ni)硬质合金复合材料
Fabrication of W-Cu functionally graded material with improved mechanical strength
Fast fabrication of W–Cu functionally graded material by high-gravity combustion synthesis and melt-
Nanoflake-modified MgO microspheres prepared by flame spraying
Fabrication of Ni/WC composite with two distinct layers through centrifugal infiltration combined wi
Optical and mechanical properties of amorphous bulk and eutectic ceramics in the HfO2-Al2O3-Y2O3 sys
In suit synthesis and bonding of Cu to W–Cu composite by combustion synthesis and centrifugal infilt
Fabrication of 60 wt%W–40 wt%Cu composite with crystal orientation by combustion synthesis
Fabrication of Cu-riched W–Cu composites by combustion synthesis and melt-infiltration in ultrahigh-
Preparation and optical properties of Eu-doped Y2O3–Al2O3–SiO2 glass
稀释剂Al_2O_3对NiO/Al体系燃烧速度的影响及其表观反应激活能计算
Optical and mechanical properties of amorphous bulk and eutectic ceramics in the HfO2–Al2O3–Y2O3 sys
Effects of temperature and holding time on bonding W and W-Cu composites with an amorphous W-Fe coat
NiO/Al体系绝热温度的数值计算与试验验证
Crystallization and fluorescence properties of Ce:YAG glass-ceramics with low SiO2 content
Preparation of W–Ni graded alloy by combustion synthesis melt-casting under ultra-high gravity
超重力熔铸Y_2O_3-Al_2O_3-SiO_2玻璃的晶化行为研究
超重力辅助燃烧合成Y_2O_3-Al_2O_3-SiO_2玻璃/Y_3Al_5O_(12)陶瓷梯度复合材料
超重力熔铸W/Cu复合材料温度及应力场的仿真
Combustion synthesis of TiCxN1?x–TiB2 ceramic composites in a high-gravity field
超重力燃烧合成钛基陶瓷复合材料
稀释剂Al2O3对NiO／Al体系燃烧速度的影响及其表观反应激活能计算
化学炉燃烧合成Al4SiC4粉体的绝热燃烧温度计算与实验研究
Eu^3＋掺杂Y2O3-Al2O3-SiO2玻璃的制备与荧光性能研究
超重力辅助燃烧合成熔渗梯度Ni-（WC—Ni）硬质合金复合材料
自蔓延高温合成制备单相氮化硅镁粉体
DEPENDENCE OF GLASS-FORMING ABILITY ON STARTING COMPOSITIONS IN Y2O3-Al2O3-SiO2 SYSTEM
Melt-casting of Si-Al-Y-O glasses and glass-ceramics by combustion synthesis under high gravity
Preparation of Y2O3-Al2O3-SiO2 glasses by combustion synthesis melt-casting under high gravity
Preparation of Transparent Y2O3-Al2O3-SiO2 Glasses by High-Gravity Combustion Synthesis with Heating
超重力燃烧合成钛基陶瓷复合材料
Eu^3＋掺杂Y2O3-Al2O3-SiO2玻璃的制备与荧光性能研究
超重力辅助燃烧合成熔渗梯度Ni-（WC—Ni）硬质合金复合材料
超重力辅助燃烧合成熔渗梯度Ni-（WC—Ni）硬质合金复合材料
期刊信息
  • 《材料导报：纳米与新材料专辑》
  • 主管单位:重庆西南信息有限公司(原科技部西南信息中心)
  • 主办单位:重庆西南信息有限公司(原科技部西南信息中心)
  • 主编：
  • 地址：重庆市渝北区洪湖西路18号
  • 邮编：401121
  • 邮箱：matreved@163.com
  • 电话：023-67398525
  • 国际标准刊号：ISSN：1005-023X
  • 国内统一刊号：ISSN：50-1078/TB
  • 邮发代号:
  • 获奖情况:
  • 国内外数据库收录:
  • 被引量:3397