位置：成果数据库 > 期刊 > 期刊详情页
Development of Multi-Cycle Quenching–Partitioning–Tempering Process and Its Applications in Engineer
  • 期刊名称：International Heat Treatment and Surface Engineeri
  • 时间：2011
  • 页码：15-23
  • 相关项目：先进高强度钢形变诱导相变增塑的微观机制
作者： X. W. Zuo, N. L. Chen, F. Gao,|Y. H. Rong|
同期刊论文项目
先进高强度钢形变诱导相变增塑的微观机制
期刊论文 46 会议论文 9
同项目期刊论文
High hardness and toughness of white cast iron: The proposal of a novel process
High strength-elongation product of Nb-microalloyed low-carbon steel by a novel quenching–partitioni
Unique impact of ferrite in influencing austenite stability and deformation behavior in a hot-rolled
The effect of intercritical annealing on the Microstructure and Mechanical Properties in a high Stre
Effect of intercritical annealing time on the microstructures and tensile Properties of a high stren
Effect of Partial Replacement of Si with Al on the Microstructures and Mechanical Properties of 1000
新型Q-P-T和传统Q-T工艺对不同C含量马氏体钢组织和力学性能的影响
Characterization of microstructures and tensile properties of TRIP-aided steels with different matri
Significance of control of austenite stability and three-stage work-hardening behavior of an ultrahi
经新型Q-P-T工艺处理后Q235钢的组织与性能
Dynamic Compression Behavior and Microstructure of a Novel Low-Carbon Quenching-Partitioning-Temperi
新型中锰热轧TRIP钢组织演变及力学性能
淬火-碳分配-回火钢的低温组织和性能
Fe-11Mn-4Al-0.2C钢的应变硬化行为
先进超高强度-高塑性Q-P-T钢
Multi-phase microstructure design of a novel high strength TRIP steel through experimental methodolo
Investigation on High Strength Hot-Rolled Plates by Quenching-Partitioning-Tempering Process Suitabl
Enhanced stability of retained austenite and consequent work hardening rate through pre-quenching pr
Work hardening behaviors of a low carbon Nb-microalloyed Si–Mn quenching–partitioning steel with dif
Nb及二次淬火对Q&P钢组织性能的影响
High Strength Ductility Steels Treated by Novel Quenching–Partitioning–Tempering Process
Deformation temperature dependence of mechanical properties and microstructures for a novel quenchin
Unique serrated flow dependence of critical stress in a hot-rolled Fe–Mn–Al–C steel
合金元素及热处理工艺对1000MPa级TRIP钢性能的影响
Microstructual Evolution of a Nb‐Microalloyed Advanced High Strength Steel Treated by Quenching‐Part
Microstructural evolution and deformation behavior of a hot-rolled and heat treated Fe-8Mn-4Al-0.2C
The Mechanism of High Strength-Ductility Steel Produced by a Novel Quenching-Partitioning-Tempering
A new effect of retained austenite on ductility enhancement in high-strength quenching-partitioning-
应力松弛对应变诱发马氏体相变影响的有限元模拟
Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity stee
Microstructural evolution and mechanical properties of hot-rolled 11% manganese TRIP steel
Ultrahigh strength-ductility steel treated by a novel quenching–partitioning–tempering process
残余奥氏体增强低碳Q-P-T钢塑性的新效应
A new effect of retained austenite on ductility enhancement in high strength bainitic steel
Orientation Relationships between Ferrite and Cementite by Edge-to-edge Matching Principle
大型半自磨机衬板成分优化模拟分析
新型MQ-P-T技术在高铬铸球中的应用
Dynamic Compression Behavior and Microstructure of a Novel Low-Carbon Quenching-Partitioning-Tempering Steel
Effect of Intercritical Annealing Time on the Microstructures and Tensile Properties of a High Strength TRIP Steel