位置：成果数据库 > 期刊 > 期刊详情页
Orientation Relationships between Ferrite and Cementite by Edge-to-edge Matching Principle
  • ISSN号：1005-0302
  • 期刊名称：Journal of Materials Science & Technology
  • 时间：2011.5.5
  • 页码：475-480
  • 分类：TG142.24[金属学及工艺—金属材料;一般工业技术—材料科学与工程;金属学及工艺—金属学] TG142.31[金属学及工艺—金属材料;一般工业技术—材料科学与工程;金属学及工艺—金属学]
  • 作者机构：[1]Institute of Marine Materials Science and Engineering, Shanghai Maritime University, Shanghai 201306, China, [2]School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
  • 相关基金：The present work was financially supported by the National Natural Science Foundation of China （Grant Nos. 51001069 and 51031001）.
  • 相关项目：先进高强度Q-P钢热处理中的竞争反应和组织形态学研究
作者： Zhong, Ning|Wang, Xiaodong|Guo, Zhenghong|Rong, Yonghua|
关键词： 取向关系, 匹配原则, 渗碳体, 铁素体, 选区电子衍射, 晶体学特征, 匹配方法, 理论预测, Orientation relationship, Pearlite, Edge-to-edge matching, Transmission electronmicroscopy
中文摘要：

珠泽铁的结晶的特征被实验和 edge-to-edge 匹配原则调查。在铁酸盐和渗碳体之间的二种新取向关系是由选择区域电子衍射的 determinated 然后由我们匹配方法的修改 edge-to-edge 解释了。有理论预言的试验性的结果的坚固性证实匹配模型的修改 edge-to-edge 的有实行可能。

英文摘要：

The crystallographic features of pearlite were investigated by experiments and edge-to-edge matching principle. Two new orientation relationships between ferrite and cementite were determinated by selected area electron diffraction and then explained by our modified edge-to-edge matching method. The consistence of the experimental results with theoretical prediction confirms the practicability of the modified edge-to-edge matching model.

同期刊论文项目
先进高强度Q-P钢热处理中的竞争反应和组织形态学研究
期刊论文 5
先进高强度钢形变诱导相变增塑的微观机制
期刊论文 46 会议论文 9
同项目期刊论文
High hardness and toughness of white cast iron: The proposal of a novel process
High strength-elongation product of Nb-microalloyed low-carbon steel by a novel quenching–partitioni
Unique impact of ferrite in influencing austenite stability and deformation behavior in a hot-rolled
The effect of intercritical annealing on the Microstructure and Mechanical Properties in a high Stre
Effect of intercritical annealing time on the microstructures and tensile Properties of a high stren
Effect of Partial Replacement of Si with Al on the Microstructures and Mechanical Properties of 1000
新型Q-P-T和传统Q-T工艺对不同C含量马氏体钢组织和力学性能的影响
Development of Multi-Cycle Quenching–Partitioning–Tempering Process and Its Applications in Engineer
Characterization of microstructures and tensile properties of TRIP-aided steels with different matri
Significance of control of austenite stability and three-stage work-hardening behavior of an ultrahi
经新型Q-P-T工艺处理后Q235钢的组织与性能
Dynamic Compression Behavior and Microstructure of a Novel Low-Carbon Quenching-Partitioning-Temperi
新型中锰热轧TRIP钢组织演变及力学性能
淬火-碳分配-回火钢的低温组织和性能
Fe-11Mn-4Al-0.2C钢的应变硬化行为
先进超高强度-高塑性Q-P-T钢
Multi-phase microstructure design of a novel high strength TRIP steel through experimental methodolo
Investigation on High Strength Hot-Rolled Plates by Quenching-Partitioning-Tempering Process Suitabl
Enhanced stability of retained austenite and consequent work hardening rate through pre-quenching pr
Work hardening behaviors of a low carbon Nb-microalloyed Si–Mn quenching–partitioning steel with dif
Nb及二次淬火对Q&P钢组织性能的影响
High Strength Ductility Steels Treated by Novel Quenching–Partitioning–Tempering Process
Deformation temperature dependence of mechanical properties and microstructures for a novel quenchin
Unique serrated flow dependence of critical stress in a hot-rolled Fe–Mn–Al–C steel
合金元素及热处理工艺对1000MPa级TRIP钢性能的影响
Microstructual Evolution of a Nb‐Microalloyed Advanced High Strength Steel Treated by Quenching‐Part
Microstructural evolution and deformation behavior of a hot-rolled and heat treated Fe-8Mn-4Al-0.2C
The Mechanism of High Strength-Ductility Steel Produced by a Novel Quenching-Partitioning-Tempering
A new effect of retained austenite on ductility enhancement in high-strength quenching-partitioning-
应力松弛对应变诱发马氏体相变影响的有限元模拟
Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity stee
Microstructural evolution and mechanical properties of hot-rolled 11% manganese TRIP steel
Ultrahigh strength-ductility steel treated by a novel quenching–partitioning–tempering process
残余奥氏体增强低碳Q-P-T钢塑性的新效应
A new effect of retained austenite on ductility enhancement in high strength bainitic steel
大型半自磨机衬板成分优化模拟分析
新型MQ-P-T技术在高铬铸球中的应用
Dynamic Compression Behavior and Microstructure of a Novel Low-Carbon Quenching-Partitioning-Tempering Steel
Effect of Intercritical Annealing Time on the Microstructures and Tensile Properties of a High Strength TRIP Steel
Microstructual Evolution of a Nb-Microalloyed Advanced High Strength Steel Treated by Quenching-Part
Microstructure and mechanical properties of a Nb-microalloyed medium carbon steel treated by quenchi
Improvement of Microstructures and Mechanical Properties of Resistance Spot Welded DP600 Steel by Do
期刊信息
  • 《材料科学技术学报：英文版》
  • 中国科技核心期刊
  • 主管单位:中国科协
  • 主办单位:中国金属学会
  • 主编：
  • 地址：中国沈阳文化路72号
  • 邮编：110016
  • 邮箱：
  • 电话：024-83978208
  • 国际标准刊号：ISSN：1005-0302
  • 国内统一刊号：ISSN：21-1315/TG
  • 邮发代号:
  • 获奖情况:
  • 国家“双百”期刊
  • 国内外数据库收录:
  • 俄罗斯文摘杂志,美国化学文摘（网络版）,荷兰文摘与引文数据库,美国工程索引,美国剑桥科学文摘,美国科学引文索引（扩展库）,日本日本科学技术振兴机构数据库,中国中国科技核心期刊
  • 被引量:474