欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
采用直流电热化学气相沉积（CVD）法制备出高强度SiC纤维（W芯）,采用拉伸试验、X射线衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）等对SiC纤维的强度、相组成、断口特征及微观结构进行了分析。结果表明,CVD-SiC纤维主要由β-SiC组成;制备过程中W芯同SiC发生化学反应,产生厚度约300nm的界面反应层,且反应层处存在着较大的残余拉应力;高强度SiC纤维裂纹产生于W/SiC界面反应层处,而低强度SiC纤维的裂纹源多处于W芯内部或纤维表面。
英文摘要：
High-strength SiC fibre（W core） was fabricated by DC heating chemical vapor deposition（CVD） method.The morphology,microstructure and fracture characteristics of the fiber were characterized by X-ray Diffraction（XRD）,Scanning Electron Microscope（SEM） and Transmission Electron Microscopy（TEM）.The strength of the fibre was also analyzed by tensile tests.The results show that the CVD-SiC fibre mainly consists of β-SiC.The interfacial reaction layer between W core and SiC layer is 300 nm in thickness and there is great thermo-residual tensile stress,which leads to the tensile strength degradation.High-strength SiC fibre cracking origin is in the W/SiC interfacial reaction zone while low-strength SiC fibre cracking is generated in the inside of W core or on the surface of the fibre.The existence of defects at W core or on SiC fibre surface leads to low tensile strength.
同期刊论文项目
同项目期刊论文
Stress Distribution in the Cruciform Specimen under Transverse Tension Stress for SiC/Ti-6Al-4V Comp
Effects of the coating system and interfacial region thickness on the thermal residual stresses in S
Effect of Interface Reaction on Interface Shear Strength of SiC Fiber Reinforced Titanium Matrix Com
期刊信息
位置：