欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
采用有限元模拟了SiC／Ti-6Al-4V复合材料冷却过程和横向拉伸试验过程，横向拉伸试样采用十字形试样。分别建立了平面应力和轴对称有限元模型，采用平面应力有限元模型计算环绕纤维圆周的界面微区应力分布，预测界面失效机制。采用轴对称有限元模型分析复合材料界面脱粘过程以及残余应力对界面径向应力分布的影响。结果表明：对于SiC／Ti-6Al—4V复合材料十字形试样，在横向拉伸载荷下的界面失效由径向应力导致，界面失效模式为法向失效，剪切失效模式未发生；十字形试样在横向拉伸载荷下界面初始脱粘位置处于界面中间；随横向拉伸应力增加，十字形试样的界面脱粘对称向两边扩展；界面径向应力随残余应力降低而升高。
英文摘要：
The cooling process of SiC/Ti - 6Al - 4V composites and the transverse tensile test were simulated by finite element method. The cruciform specimen was selected to conduct the transverse tensile test of SiC/Ti - 6Al - 4V composites. In finite element analysis, the plain stress finite element model was used to analyze the interface stress distribution and failure mechanism of the cruciform specimen under the transverse tensile stress. The axisymmetric finite element model was adopted to analyze the interface debonding process and the effects of residual stress on the radial stress distribution at the interface. The results show that under the transverse tensile stress, the interface failure of the cruciform specimen is only resulted from the radial stress. The interface failure mode is the normal failure not the tangential failure. The interface debonding of the cruciform specimen appears in the middle of the interface. With the increasing of the transverse tensile stress, the interface debonding of the cruciform specimen symmetrically extends to both sides. Radial stresses at the interface increase with the decreasing thermal residual stresses.
同期刊论文项目
同项目期刊论文
Stress Distribution in the Cruciform Specimen under Transverse Tension Stress for SiC/Ti-6Al-4V Comp
Effects of the coating system and interfacial region thickness on the thermal residual stresses in S
Effect of Interface Reaction on Interface Shear Strength of SiC Fiber Reinforced Titanium Matrix Com
Evaluation of interfacial fracture toughness of SiC fibre reinforced titanium-matrix composite using
Effect of Mo coating on the interface and mechanical properties of SiC fiber reinforced Ti6Al4V comp
Microstructure and grain growth of the matrix of SiCf/Ti-6Al-4V composites prepared by the consolida
Microstructure evolution of TiAl matrix in the process of magnetron sputtering and hot isostatic pre
Study on longitudinal tensile properties of SiCf/Ti-6Al-4V composites with different interfacial she
期刊信息
位置：