位置：成果数据库 > 期刊 > 期刊详情页
Texture evolution and formability under different hot rolling conditions in ultra purified 17%Cr fer
  • ISSN号：1044-5803
  • 期刊名称：Materials Characterization
  • 时间：2013
  • 页码：93-100
  • 相关项目：Fe-Cr、Fe-Si系BCC钢薄带连铸成形组织性能控制机理
作者： Gao Fei|Liu Zhenyu|Liu Haitao|Wang Guodong|
同期刊论文项目
Fe-Cr、Fe-Si系BCC钢薄带连铸成形组织性能控制机理
期刊论文 42 会议论文 5 获奖 10 专利 1
同项目期刊论文
Evolution of Through-Thickness Texture in Ultra Purified 17%Cr Ferritic Stainless Steels
Characterization of microstructure, texture and magnetic properties in twin-roll casting high silico
Formation of {001} <510> recrystallization texture and magnetic property in strip casting non-
Development of λ-fiber recrystallization texture and magnetic property in Fe-6.5 wt% Si thin
Microstructure, texture and magnetic properties of strip-cast 1.3% Si non-oriented electrical steels
常化处理对2.9%Si＋0.7%Al无取向硅钢织构及磁性能的影响
超纯Cr17铁素体不锈钢热变形过程的动态回复行为
TSCR热轧工艺对3.2%Si无取向硅钢组织性能的影响
热轧后退火对超纯Cr17钢成形性能的影响
热轧后退火对超纯铁素体不锈钢表面皱折的影响机理
Influence of the finish rolling temperatures on the microstructure and texture evolution in the ferr
Effect of electromagnetic swirling flow in slide-gate SEN on flow field in square billet continuous
双辊薄带连铸对无取向硅钢织构和磁性能的影响
21%Cr铁素体不锈钢成型性能和表面起皱研究
热轧工艺对409L铁素体不锈钢深冲性的影响
热轧工艺对Cr12钢表面起皱的影响机制
双辊铸轧Cr12钢的热处理工艺对深冲性和抗皱性的影响
精轧温度对含铌、硼Cr17薄板成形性及表面皱折的影响
高纯Cr17铁素体不锈钢的热变形行为
B对Nb稳定化的超纯Cr17铁素体不锈钢性能的影响
钛稳定化超纯铁素体不锈钢的屈服行为
Toughness under different rolling processes in ultra purified Fe-17 wt% Cr alloy steels
Effect of Direct Quenching on Microstructure and Mechanical Properties of a Wear-resistant Steel
薄带连铸与常规生产流程条件下 Cr17铁素体不锈钢的织构及成形性能
17%Cr铁素体不锈钢中的第二相与织构
Microstructure, texture and magnetic properties of strip casting Fe-6.2 wt%Si steel sheet
薄带连铸Cr17铁素体不锈钢的织构演变
超低碳、氮Cr17铁素体不锈钢低温轧制工艺中织构演变
精轧温度对含铌Cr17铁素体不锈钢组织、织构及成形性的影响
退火温度对双辊连铸无取向硅钢组织的影响
双辊薄带铸轧机过程控制系统平台开发
基于ACE的中厚板轧机二级控制系统改造
双辊薄带连铸取向硅钢的研究进展
Influence of the finish rolling temperatures on the microstructure and texture evolution in the ferritic stainless steels
Microstructure ＆ texture evolution and magnetic properties of high magnetic-induction 6.5% Si electrical steel thin sheet fabricated by a specially designed rolling route