中文摘要：

从电的弧炉子获得的眼镜陶艺焚烧装置苍蝇灰的熔融的炉渣被通过热处理使用成核和结晶化生产过程。起核心作用的代理人的效果(TiO < 潜水艇 class= “ a-plus-plus ” > 2 和 Cr < 潜水艇 class= “ a-plus-plus ” > 2 O < 潜水艇 class= “ a-plus-plus ” > 结晶化动力学和热处理炉渣安排的 3 )on 被调查。结果证明起核心作用的代理人改变了结晶化阶段和获得的眼镜陶艺的形态学。有 TiO 的玻璃的最佳热处理时间表<潜水艇class=“ a-plus-plus ”> 2 为 1.5 h 在 1258 K 为 1.5 h 和水晶生长在 952 K 作为成核被决定，当时有 Cr 的那些价值<潜水艇class=“ a-plus-plus ”> 2 O <潜水艇class=“ a-plus-plus ”> 3 为 2 h 为 2 h 并且在 1 238 K 在 971 K 被估计。TiO < 潜水艇 class= “ a-plus-plus ” > 充当起核心作用的代理人的 2 能减少炉渣的激活精力并且弄短与 Cr 比较的全部的热处理时间 < 潜水艇 class= “ a-plus-plus ” > 2 O < 潜水艇 class= “ a-plus-plus ” > 3 。在最佳热处理条件下面获得的眼镜陶艺是环境友好、有的显著物理 / 机械的性质和化学耐久性。

英文摘要：

Glass-ceramics obtained from the electric arc furnace molten slag of incinerator fly ash was produced by applying nucleation and crystallization through heat treatment process. The effects of nucleating agent （TiO2 and Cr2O3） on the crystallization kinetics and heat treatment schedule of the slag were investigated. The results show that the nucleating agents changed the crystallization phase and morphology of the obtained glass-ceramics. The optimum heat treatment schedule of the glass with TiO2 was determined as nucleation at 952 K for 1.5 h and crystal growth at 1 258 K for 1.5 h, while those values with Cr203 were estimated at 971 K for 2 h and at 1 238 K for 2 h. TiO2 acting as nucleating agent could decrease the activation energy of the slag and shorten the total thermal treatment time in comparison with Cr2O3. The glass-ceramics obtained under the optimum heat treatment condition was environmentfriendly and had remarkable physical/mechanical properties and chemical durability.