中文摘要：

提出了一种基于包层模谐振的光纤温度传感器.它是通过将三包层石英特种光纤（TCQSF）两端分别与普通单模光纤（SMF）电弧熔接构成的SMF-TCQSF-SMF结构.根据耦合模理论,首先将TCQSF等效为三个同轴波导,按各波导模场的分布特点标量计算其传输模式的色散曲线,并深入研究其耦合长度与传输谱线之间的关系;其次根据光纤的热光效应及热膨胀效应,分析计算该传感器的温度灵敏度;最后选取耦合长度为一个拍长时的传感器进行温度传感实验.实验结果表明,在35—95℃的温度变化范围内,其温度灵敏度为73.74 pm/℃,与理论计算结果一致.因此,该传感器具有结构简单、制备容易、灵敏度高、包层模激发可控等优点,可用于工业生产、生物医学等温度传感领域.

英文摘要：

A triple-cladding quartz specialty fiber （TCQSF） temperature sensor based on cladding mode resonance is made. The sensor is fabricated by just splicing a short, few-centimeter-long segment of TCQSF between two standard single- mode fibers （SMFs）, so the sensor structure is simple. In order to explain its sensing principle in detail, we assume that the TCQSF is equivalent to three coaxial waveguides based on coupling mode theory. Utilizing the scalar method and the relationship between Bessel function and mode field distribution of step-index circular symmetry waveguide, the mode field distribution of these waveguides and their characteristic equation can be easily obtained. Then the dispersion curves of each mode which is transmitted in the three waveguides can be calculated. The intersection between the fundamental core mode LP01 （rod） in the rod waveguide and the cladding mode LP01 （tube） in the tube waveguide I indicates that the two modes have the same propagation constant, and satisfy the phase-matching condition when the wavelength is 1563.7 nm which is known the resonant wavelength. And only when the sensor length is equal to the beatlength, can the light be coupled completely from the core to the fluorine-doped silica cladding. Thus, the cladding mode resonance phenomenon occurs and a band-stop filter spectrum will be obtained. Then the sensor is applied to the simulation calculation of the temperature sensing characteristics. With increasing temperature, both the refractive index of each layer and the sizes of the axial and radial fibers will change, which will finally lead to a big difference on the dispersion curves of LP01 （rod） and LP01 （tube）. Therefore, the resonant wavelength shift of the sensor can be obtained by just calculating the dispersion curves of these two modes at different temperatures, and the scope of curvature sensitivity is 70.76-97.36 pm/℃. Finally, a straight forward experiment is performed to prove the temperature sensing properties. Experimental results