欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
利用连续流变成形实验机制备断面为5 mm×50 mm的Mg-3Sn-1Mn镁合金型材,研究辊靴型腔中的合金组织及其形成机理。结果表明：合金熔体首先在轧辊和靴子表面异质形核。当轧辊表面比较粗糙时,合金在轧辊表面异质形核能力较强,利于枝晶的形成;在轧辊剪切/冷却作用下,枝晶发生破碎形成自由晶,枝晶破碎主要由枝晶臂剪切断裂机制和枝晶臂熔断机制引起;自由晶在生长过程中,由于合金熔体内部的层流剪切作用,自由晶进一步被破碎,晶粒周围溶质分布趋于均匀,其散热择优方向也不明显,沿各个方向生长机会均等,晶粒以球状晶或等轴晶形式长大。
英文摘要：
Mg-3Sn-1Mn alloy profiles with cross-section size of 5 mm×50 mm were prepared by the continuous rheo-forming process,and the microstructures and formation mechanisms of the alloy in the roll-shoe gap were investigated.The results show that the heterogeneous nucleation of the alloy occurs firstly on the surface of roll-shoe.When the roll surface is rough,the heterogeneous nucleation capability of the alloy is stronger on the roll surface,which is favorable to the formation of dendrites.The dendrites are broken up to form free grains under the action of cooling/shearing of the roll.The dendrite fragmentation is caused by the shearing fracture mechanism of dendritic arms and the blowing-out mechanism of dendritic arms.During the growing process of free grains,because of laminar shearing caused by the roll,the free grains are broken up further,the solute distribution around free grains is homogenous,the preferred orientation of heat dissipation is not obvious,the growing chances of grains are equal in all directions,and the grains grow in golobular or equiaxed form.
同期刊论文项目
同项目期刊论文
Superplasticity-Like Behavior, Microstructures and Deformation Mechanism Map in. Superlight Mg-6Li-3
Effects of interfacial friction on the microstructures of magnesium-tin alloy during continuous rheo
Microstructure formation and mechanical properties in AZ31 alloy processed by continuous rheo-extrus
Effect of heat treatment on the microstructures and mechanical properties in AZ31 magnesium alloy pr
Electrodeposition of hydroxyapatite coating on Mg-4.0Zn-1.0Ca-0.6Zr alloy and in vitro evaluation of
Effects of process parameters on microstructure and properties of AZ91 alloy prepared by cooling/sti
Effects of technical parameters of continuous semisolid rolling on microstructure and mechanical pro
Microstructure and mechanical properties of Al-Mg-Sc alloy processed by semi-solid continuous castin
Effects of dynamic recrystallisation during deep rolling of semisolid slab and heat treatment on mic
The microstructure and tensile property of Mg-Zn-Ca-Zr alloy sheet coated with HA and its antihemoly
Microstructure formation mechanism and properties of AZ61 alloy processed by melt treatment with vib
Temperature distribution and its Influence on microstructure of AZ31 alloy during semisolid rheo-rol
Microstructure and properties of Mg-3Sn-1Mn (wt.%) alloy processed by a novel continuous shearing an
Microstructure evolution and properties of Mg-3Sn-1Mn (wt.%) alloy strip processed by semisolid rheo
Microstructure and properties of Mg-3Sn-1Mn (wt. %) alloy processed by a novel continuous shearing a
Semisolid die forging process, microstructures and properties of AZ31 magnesium alloy mobile telepho
Force analysis and experimental study of pure aluminum and Al-5%Ti-1%B alloy continuous expansion ex
Influence of parameters on microstructure of A356 alloy sheets processed by a novel rheo-rolling pro
Simulation of temperature field and metal flow during continuous semisolid extending extrusion proce
期刊信息
位置：