欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
实验研究微尺度射流流场中微细梁发生的振动过程，并提出基于该原理测量微尺度射流速度。实验使用长度56．2ram、直径约0．07mm铜丝作为微细梁，使用直径约0．36mm喷管产生的微尺度射流。使用高速摄影仪观察射流流速在2．7～27．3m／s间梁振动的变化。试验结果发现当射流喷嘴对准梁3／5处时，振动过程中振幅随射流速度上升。而当射流喷嘴对准梁的9／10和3／4处时，在高流速下，振幅不随流速上升。使用霍尔传感器和磁铁测量梁的振动，当喷嘴对准梁的3／4处，霍尔传感器输出电压有效值随射流流速线性增长。但在其他位置，由于磁铁改变了梁的均匀结构，振动随流速的变化不规律。
英文摘要：
In the experiment, the vibration of a micro cantilever varying with the jet velocity is studied. It is suggested to measure the micro scale jet velocity based on this mechanism. A copper thread with length 56.2mm, diameter 0.07ram is used as the micro cantilever. The jet velocity comes from a micro nozzle with diameter 0.36ram. The vibration of cantilever is investigated with a high-speed camera while the jet velocity varying between 2.7-27.3m/s. The result shows that the vibration amplitude increase with the jet velocity while the nozzle is amied at 3/5 of the cantilever length. But while the nozzle is aimed at 9/10 or 3/5 of the cantilever length, the amplitude stops increasing at high jet veloicty. A hall sensor and a magnet are used to measure the vibration. The output voltage increases linearly with the jet velocity, while the nozzle is aimed at the 3/4 of the cantilver lenth. But at the other positions, the viburation is not inneratic because the attached magnet change the mass distribuion of the cantilever.
同期刊论文项目
同项目期刊论文
Physicochemical Characterizations and Desulfurization Properties in Coal Combustion of Three Calcium
Ceria as a catalyst for hydrogen iodide decomposition in sulfur-iodine cycle for hydrogen production
Experimental and modeling study on the influence of H2 addition on selective non-catalytic reduction
Catalytic mechanism of sodium compounds in black liquor during gasification of coal black liquor slu
期刊信息
位置：