位置：成果数据库 > 期刊 > 期刊详情页
双连续复合材料SiC/Fe-40Cr与SiC/Al2618合金干摩擦磨损行为的实验研究与数值分析（英文）
  • ISSN号：1003-6326
  • 期刊名称：《中国有色金属学报：英文版》
  • 时间：0
  • 分类：TG146[金属学及工艺—金属材料;一般工业技术—材料科学与工程;金属学及工艺—金属学]
  • 作者机构：[1]东北大学多金属共生矿生态化冶金教育部重点实验室,沈阳110819, [2]桂林理工大学有色金属及材料加工新技术教育部重点实验室,桂林543004
  • 相关基金：Project （2012BAE06B01） supported by the Key Technology R＆D Program During the 12th Five-Year Plan Period, China; Projects（21201030, 51272039, 51032007） supported by the National Natural Science Foundation of China; Project （1099043） supported by the Science and Technology in Guangxi Province, China
作者： 姜澜[1], 姜艳丽[2], 喻亮[2], 苏楠[1], 丁友东[1]
关键词： 磨损, SIC, Al2618合金, SIC, Fe-40Cr, 双连续, 有限元法
中文摘要：

利用环环式摩擦磨损试验机研究双连续复合材料SiC/Fe40Cr与SiC/2618Al合金在滑动速度30~105m/s,载荷1.0~2.5MPa条件下的干摩擦磨损性能。实验结果表明,在较高的载荷和滑动速度下,SiCn/2618Al复合材料的磨损机制是两体磨料磨损和氧化磨损。作为增强相的连续网络结构的SiC陶瓷可避免通常发生在传统的粒子增强复合材料上的第三体磨损现象。机械混合层（MML）极大地控制了复合材料的磨损速率和摩擦系数。在进行较高的滑动速度测试时,由于机械混合层的间歇的生形和消除,复合材料表现出较高的摩擦系数和波动。为了便于有限元模型（FEM）计算,用一个连续结构单元来代表三维碳化硅结构增强铝基复合材料的微观结构。利用有限元模型（FEM）预测的复合材料磨损和应力应变数据与实验数据一致

同期刊论文项目
非氧化物复相耐火材料的免烧成技术及性能研究
期刊论文 139 会议论文 11 获奖 16 专利 20
间隔自组装法制备介孔有机硅、形成机理与性能研究
期刊论文 15 会议论文 7 获奖 2
低成本B4C-SiC-Si复合材料的净尺寸制备、组织与性能
期刊论文 3 专利 2
同项目期刊论文
Synthesis, characterization and photoactivity of bi-crystalline mesoporous TiO2
Effect of Silicon Addition on High-Temperature Solid Particle Erosion-Wear Behaviour of Mullite-SiC
Effect of additives on the expansion behavior of alumina-spinel castables
A Novel Method of Synthesizing LiFePO 4 /C with Excellent Electrochemical Properties
Synthesis of Si3N4 powder with tunable α/β-Si3N4 content from waste silica fume using carbothermal r
Synthesis of TiN-Si3N4 Composites from Rutile and Quartz by Carbothermal Reduction Nitridation
Synthesis of Al8B4C7 ceramic powder from Al/B4C/C mixtures
High-temperature transformation of asbestos tailings by carbothermal reduction
Transmission electronmicroscopy study on crack propagation characteristics of pressureless sintered
Influence of CeO 2 Additive on the Phase Transformations of Zirconia from Zircon Ore by Carbothermal
High temperature and water-based evaporation-induced self-assembly approach for facile and rapid syn
Ni(NO3)2-assisted catalytic synthesis and photoluminescence property of ultralong single crystal Sia
两种镁源反应烧结合成镁铝尖晶石
Co-catalyzed nitridation of silicon and in-situ growth of α-Si<sub>3</sub>N<sub>4&
反应温度对低品位铝矾土和钛铁矿制备&beta;-Sialon/Ti(C,N)复相粉体的影响
Phase behavior analysis of MgO–C refractory at high temperature: Influence of Si powder additives
Cation Substitution Dependent Bimodal Photoluminescence in Whitlockite Structural Ca3？xSrx(PO4)2:Eu2
Synthesis of SiC nanowires by thermal evaporation method without catalyst assistant
ZrO_2添加量对ZTA陶瓷力学性能及冲蚀磨损行为的影响
以硅酸钠为前驱物用间隔自组装法制备等级介孔二氧化硅
SiO2微粉和水泥加入量对矾土-红柱石基浇注料性能的影响
Preparation and mechanical properties of NiCr-Al2O3-ZrO2(8Y) ceramic composites
碳化硼－泡沫铝双层复合材料的制备及其防弹性能
Influence of Temperature on Phase Composition of Nitridation Products from Rutile and Fly Ash
Phase Behaviors of Talc Minerals in Carbothermal Reduction Process
Growth of α-Si3N4 nanobelts via Ni-catalyzed thermal chemical vapour deposition and their violet-blu
Synthesis and characterization of single-crystalline phase Li-&alpha;-Sialon
Study on Mineral Composition and Main Mineral Morphology of Bauxite from ZhongXiang, HuBei Province
Fe–Sialon–Ti(C,N) composites from carbothermal reduction–nitridation of low-priced minerals and thei
The effects of SiCp addition on the z-value and mechanical properties of &beta;-Sialon&ndash
Synchronistic preparation of fibre-like SiC and cubic-ZrO2/SiC composite from zircon via carbotherma
Preparation and Mechanical Properties of TiN-Al2O3 Refractory Composites
Influence of Sintering Temperature on Phase Behavior of Products from Rutile and Quartz by Aluminoth
Progress and Developing trend of purging plugs for refining ladle
Preparation of Porous Silicon by Magnesiothermic Reduction from Serpentine
Phase and microstructure evolution of mullite synthesized from coal gangue and &gamma;-Al2O3
Growth and Morphology of &beta;-Si3N4 Nano-belts by Carbothermal Reduction Nitridation of Used S
Catalytic synthesis and growth mechanism of SiC@SiO2 nanowires and their photoluminescence propertie
Synthesis of ZrN-Si3N4 composite powders from zircon and quartz by carbothermal reduction and nitrid
用叶蜡石与金红石碳热还原&ndash;氮化合成Sialon&ndash;Ti(N,C)复合材料
Investigation on the photoelectrocatalytic activity of well-aligned TiO2 nanotube arrays
Mullite-SiC-Sialon复相耐磨耐火材料高温冲蚀磨损行为的研究
配碳量对锆英石和氧化铝碳热还原氮化合成ZrN-SiAlON的影响
用锆英石低成本制备YSZ-SiC复相耐高温材料的研究
碳化硼颗粒级配对SiC/B4C复合材料组织与性能的影响
Study on Extraction of Alumina from Sericite Phyllite
金红石和铝灰铝热还原氮化合成TiN-Al2O3的物相研究
Influence of yttria addition on the phase transformations of zirconia from zircon ore by carbotherma
Phases Transformation of Boron Mud During Carbothermal Reduction Process
Microstructural and Mechanical Characterization of Pressure-Less Sintered AlN-polytypoid Based Compo
Synthesis of ZrN-sialon composites from zircon and alumina by carbothermal reduction-nitridation
Synthesis of Ti(C,N) Powder via CRN Method from Rutile/Carbon Mixtures
Synthesis of Fiber-Like SiС by Carbothermal Reduction of Used Silica Bricks
In-situ Reaction, Fabrication and Properties of CaAl12O19/Al2O3 Composites
Phase behavior of serpentine mineral by carbothermal reduction nitridation
Improving hydration resistance of aluminium powders by using Al2O3 sol-gel method
Investigation on lanthanide-dependent z value of JEM-phase Sialon
Synthesis and formation mechanism of twinned SiC nanowires made by a catalyst-free thermal chemical
六铝酸钙/镁铝尖晶石-氧化铝复相梯度材料的制备
Novel Synthesis Method and Characterization of Porous Calcium Hexa-Aluminate Ceramics
刚玉-Sialon-TiN 复相材料抗热震性能的研究
Preparation of LiTaO 3 nanoparticles by a sol–gel route
A simple ternary non-ionic templating system for preparation of complex hierarchically meso–mesoporo
添加CaO对Al2O3陶瓷的物相、显微形貌和性能的影响
Phase transformation of high aluminium fly ash in carbothermal reduction–nitridation at high tempera
Fabrication of ZrO2-SiC composites from natural zircon ore by carbothermal reduction
Preparation and mechanical properties of NiCr&ndash;Al2O3&ndash;ZrO2 (8Y) ceramic composites
Preparation of 3D interconnected macroporous hydroxyapatite scaffolds by PVA assisted foaming method
Preparation, Microstructure and Mechanical Properties Spinel- Corundum-Sialon Composite Materials fr
Effect of Al<sub>2</sub>O<sub>3</sub> addition on properties of non-sintered
New Yellow-Emitting Whitlockite-type Structure Sr1.75Ca1.25(PO4)2:Eu2+ Phosphor for Near-UV Pumped W
Thermal evaporation synthesis of SiC/SiOx nanochain heterojunctions and their photoluminescence prop
Synthesis of b-sialon/Ti(C, N) powders from mineral waste residue via carbothermal reduction nitrida
The Role of Infiltration Temperature in the Reaction Bonding of Boron Carbide by Silicon Infiltratio
ZrO2添加量对ZTA陶瓷力学性能及冲蚀磨损行为的影响
Solid particle erosion-wear behavior of SiC–Si<sub>3</sub>N<sub>4</sub> comp
Preparation and blast furnace slag corrosion behavior of SiC–Sialon–ZrN free-fired refractories
Novel calcium hexaluminate/spinel-alumina composites with graded microstructures and mechanical prop
Si3N4-SiCp Composites Reinforced by In Situ Co-Catalyzed Generated Si3N4 Nanofibers
a-Sialon with Elongated Grains Synthesized by Carbothermal Reduction-Nitridation
Low-Density Ceramic Microspheres Prepared from Kaolinite and Magnesite
Phase Transformation of Diatomite During Magnesiothermic Reduction Process
Phase Behavior Analysis of Low-grade Bauxite and Rutile by Carbothermal Reduction-nitridation
Influence of the Binder Amount on the Properties of the Non-Sintering Ti(C,N)-Si 3 N 4 -SiC Composit
Performance and Phase Behavior of Quartz-Aluminum Matrix
Effect of Temperature on the Phase Behaviors of Zircon by Carbothermal Reduction-Nitridation
免烧成低密度Si3N4/SiC复相耐火材料的制备及性能研究
Influence of carbon sources on LiFePO 4 /C composites synthesized by the high-temperature high-energ
Crystal structure of NdSi 6-z Al 1+z O z N 10-z (z = 0.4) determined by single-crystal X-ray diffrac
Influence of Aluminum Contents on Phase Behavior and Properties of TiN-Sialon-Corundum Composites by
添加Y2O3对铝热还原氮化制备TiN-&beta;-Sialon-刚玉复相材料性能的影响
Preparation and Properties of Non-Nitriding-Sintering SiC-Si3N4-Corundum Composite Refractories
Coprecipitation-Combustion Synthesis and Sintering of Lanthanum Chromite
Catalyst-assisted synthesis and growth mechanism of ultralong single crystal &alpha;-Si3N4 nanob
β-Sialon nanowires, nanobelts and hierarchical nanostructures: morphology control, growth mechanism
Study on the slag corrosion resistance of unfired Al2O3–SiC/β-Sialon/Ti(C,N)-C refractories
Phase transformation of coal gangue by aluminothermic reduction nitridation: Influence of sintering
Preparation, microstructure, and compressive strength of carbon foams derived from sucrose and kaoli
反应温度和锆英石添加量对石英碳热还原氮化产物的影响
免烧成硼酸铝/碳化硅耐火材料的性能研究
Fe-catalyzed growth of one-dimensional α-Si3N4 nanostructures and their cathodoluminescence properti
Characterization of dielectric performance of tourmaline single crystals from Yunnan, China
Solid Particle Erosion Behavior of 3YSZ Ceramics at Elevated Temperatures
蓝晶石基微孔针状莫来石的制备、结构及性能研究
反应温度对低品位铝矾土和钛铁矿制备β-Sialon／Ti（C，N）复相粉体的影响
添加不同Al_2O_3对蓝晶石基微孔莫来石陶瓷相组成、显微结构与性能的影响
Al2O3-SiC复相粉对Al2O3-SiC—C材料性能的影响
铝粉及助烧剂添加量对刚玉-Sialon-TiN抗热震性能的影响
Progress on Preparation of Refractory Powder Using Nonmetallic Minerals and Its Applications
High-temperature and water-based evaporation induced self-assembly approach for facile and rapid syn
A simple ternary non-ionic templating system for preparation of complex hierarchically meso-mesoporo
The recovery ofmolybdenum(VI) from rhenium(VII) on amino-functionalized mesoporous materials
Aminopropyl-graftedvarious silica mesostructures for adsorption of molybdenum ions fromRe-containing
Synthesis,characterization and photoactivity of bi-crystalline mesoporous TiO2
Facile preparation of hierarchically meso-mesoporous silicas with ultra-large pores and pore volumes
Siliceous mesocellular foams modified via a partitioned cooperative self-assembly process using hexa
以硅酸钠为前驱物用间隔自组装法制备等级介孔二氧化硅
Water-deficient templating system: a general, versatile and efficient synthetic approach for mesopor
Synthesis of KIT-6 type mesoporous silicas with tunable pore sizes, wall thickness and particle size
期刊信息
  • 《中国有色金属学报：英文版》
  • 中国科技核心期刊
  • 主管单位:中国科学技术协会
  • 主办单位:中国有色金属学会
  • 主编：黄伯云
  • 地址：中国长沙中南大学
  • 邮编：410083
  • 邮箱：f-xsxb@csu.edu.cn
  • 电话：0731-88830949
  • 国际标准刊号：ISSN：1003-6326
  • 国内统一刊号：ISSN：43-1239/TG
  • 邮发代号:42-317
  • 获奖情况:
  • 国家“双百”期刊,第二届全国优秀科技期刊评比二等奖,中国有色金属工业总公司优秀科技期刊一等奖
  • 国内外数据库收录:
  • 俄罗斯文摘杂志,美国化学文摘（网络版）,荷兰文摘与引文数据库,美国工程索引,美国剑桥科学文摘,美国科学引文索引（扩展库）,英国科学文摘数据库,日本日本科学技术振兴机构数据库,中国中国科技核心期刊
  • 被引量:1159