位置：成果数据库 > 期刊 > 期刊详情页
Influences of crystallography and delamination on anisotropy of charpy impact toughness in API X100
  • ISSN号：0921-5093
  • 期刊名称：Materials Science and Engineering A-Structural Mat
  • 时间：2014.6.23
  • 页码：53-62
  • 相关项目：非等温热激励下大变形薄带连铸Fe-Si合金的超快速再结晶与择优取向研究
作者： Xiaolong Yang|Yunbo Xu|Xiaodong Tan|Di Wu|
同期刊论文项目
非等温热激励下大变形薄带连铸Fe-Si合金的超快速再结晶与择优取向研究
期刊论文 44 会议论文 15 专利 3 著作 1
同项目期刊论文
超快速退火下超低碳钢的再结晶行为研究
快速加热连续退火对超高强TRIP钢显微组织与力学性能的影响
初始组织对钒微合金化TRIP钢组织性能的影响
高强贝氏体基体钒微合金化TRIP钢的性能
贝氏体区等温处理对钒微合金化TRIP钢组织性能的影响
Isothermal bainite transformation in aluminnium bearing TRIP steel
Cu2S and AlN precipitates in Fe-3%Si-0.5%Cu steel produced by low slab reheating technique
The flow stress and microstructures of Fe-1.6%Si silicon steel
含磷低硅TRIP钢快速退火组织演变行为研究
临界区退火对含磷低硅TRIP钢组织性能的影响
1000MPa级经济型高韧性工程机械用钢的研究开发
Characterization of Microstructure and Texture in Grain-Oriented High Silicon Steel by Strip Casting
Relationships among crystallographic texture, fracture behavior and charpy impact toughness in API X
Characterization of initial structures, texture and precipitates in strip-cast 3wt%Si steel sheet
Microstructure of martensite in Fe–C–Cr and its implications for modelling of carbide precipitation
Microstructure–properties relationship in a one-step quenched and partitioned steel
Effect of partitioning procedure on microstructure and mechanical properties of a hot-rolled directl
A novel design: Partitioning achieved by quenching and tempering (Q-T & P) in an aluminium-a
Austenite stabilization and high strength-elongation product of a low silicon aluminum-free hot-roll
Study of microstructure and Texture of Nb-IF high strength steel after cold rolling and annealing
TRIP effect in a hot-rolled low-carbon high strength complex phase steel
Microstructure evolution and mechanical properties of a hot-rolled directly quenched and partitioned
薄带连铸Fe-2.7%Si铸带组织和析出物研究
Evolution of recrystallization microstructure and texture during rapid annealing in strip-cast non-o
一步淬火分配钢的工艺设计与微观组织演变
Isothermal bainite transformation in low silicon TRIP Steel with phosphorus addition
Development of microstructure and texture in strip casting grain oriented silicon steel
新型热轧低碳TRIP钢的轧制工艺与疲劳性能
双辊薄带连铸1.2%Si无取向电工钢组织和析出物
On abnormal growth of {210} grain in grain-oriented silicon steel
Evolution of cube texture in strip-cast non-oriented silicon steels
冷轧工艺对取向硅钢初次再结晶织构的影响
Effect of annealing after strip casting on texture development in grain oriented silicon steel produ
常化对薄带连铸Fe-1.3%Si钢组织和磁性能的影响
不同冷轧退火工艺下薄带连铸无取向硅钢的组织和磁性能
1450mm六辊可逆冷轧机轧制超宽超薄料的试验