欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
通过在国产1450mm六辊可逆冷轧机上将1．8mm×1250mm的SPHC热轧酸洗卷轧成0．18mm×1200mm超薄高精度带钢的单轧程轧制试验，不仅验证了国产1450mm六辊可逆冷轧机的可靠性和先进性，还证明了单轧程轧制超薄高精度带钢的可行性，由此可为企业降本增效提供技术参考。
英文摘要：
The expeiment of single rolling process for ultra-thin high precision 0. 18mm ×1200mm strip by 1.8mm× 1250mm SPHC hot rolled and pickled coil in homemade 1450mm reversing cold rolling mill was successful. It proved that the advantage of homemade 1450mm reversing cold rolling mill and feasibility of rolling taltra-thin high precision strip by single rolling process. It would be a reference for enterprises reducing cost and increasing benefit.
同期刊论文项目
同项目期刊论文
Characterization of Microstructure and Texture in Grain-Oriented High Silicon Steel by Strip Casting
Relationships among crystallographic texture, fracture behavior and charpy impact toughness in API X
Effect of partitioning procedure on microstructure and mechanical properties of a hot-rolled directl
Austenite stabilization and high strength-elongation product of a low silicon aluminum-free hot-roll
Microstructure evolution and mechanical properties of a hot-rolled directly quenched and partitioned
Evolution of recrystallization microstructure and texture during rapid annealing in strip-cast non-o
Effect of annealing after strip casting on texture development in grain oriented silicon steel produ
Through-thickness shear strain control in cold rolled silicon steel by the coupling effect of roll g
Development of strong {001} texture and magnetic properties in Fe-6.5wt.%Si thin sheet produced by r
Microstructure and texture evolution of strip casting 3 wt% Si non-oriented silicon steel with colum
期刊信息
位置：