欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
以聚二甲基硅氧烷（PDMS）为前驱体聚合物，采用浸渍法在支撑体上涂覆制备PDMS支撑膜，将其在惰性气氛下350～480℃低温热解，制备有机／无机膜。考察了制膜工艺条件对膜气体分离性能的影响：并借助于TG和FT-IR测试手段探讨了PDMS的热解过程及化学结构的变化；采用SEM对有机／无机膜的微观形貌进行表征。研究表明，采用低温热解法可以成功制备出气体分离性能良好的有机／无机膜。该膜既保留了有机膜的柔韧性，又具有无机膜的热稳定性好的优点，并表现出良好的气体渗透性能和选择性。PDMS制膜液的浓度、浸渍次数、复合膜的热解温度及基体孔径和性质等因素对有机／无机膜的气体分离性能以及膜层结构有较大的影响。在最佳工艺条件下制备的有机／无机膜其02渗透通量为21．2GPU（1GPU=7．501×10-12m3（STP）／（m2．S·Pa）），O2／N2分离系数为2．28。
英文摘要：
The organic/inorganic membranes were prepared v/a low-temperature pyrolysis of polymers. Firstly, poly- meric membranes were prepared by dip-coating method using PDMS as the precursor and stainless steel as the support. Then they were pyrolyzed at 350-480℃ under inert atmosphere. The effects of preparation conditions on the gas separation performance of the organic/inorganic membranes were investigated. Chemical structure changes of PDMS in the pyrolysis process were studied by TG and FT-IR. The morphology of organic/inorganic membrane was charac- terized by SEM. The results showed that the organic/inorganic membranes with good gas separation performance could be successfully prepared by low-temperature pyrolysis of PDMS. The membrane retains part flexibility of PDMS, and presents good thermostability and high gas permselectivity. The gas separation performance and mem- brane layer structure of organic/inorganic membranes are greatly affected by the preparation conditions such as the PDMS concentration, coating times, pyrolysis temperature and properties of support. The gas separation performances prepared under the optimum condition＇ are that the O2 permeation flux of 21.2 GPU（1 GPU=7.501 X 10-12 m3（STP）/（m2.s.Pa）） and O2/N2 selectivity of 228.
同期刊论文项目
同项目期刊论文
Preparation and gas separation performance of supported carbon membranes with ordered mesoporous car
Preparation and characterization of supported ordered nanoporous carbon membranes for gas separation
Comparison study of the effect of PVP and PANI nanofibers additives on membrane formation mechanism,
Visualization of the Formation of Interfacially Polymerized Film by an Optical Contact Angle Measuri
Novel tertiary amino containing thin film composite membranes prepared by interfacial polymerization
Performance Improvement of Polysulfone Ultrafiltration Membrane Using Well-Dispersed Polyaniline-Pol
An Effective Method to Improve the Performance of Fixed Carrier Membrane via Incorporation of CO2-se
Gas separation performance of C/CMS membranes derived from poly(furfuryl alcohol) (PFA) with differe
Preparation of dual-layer cellulose/polysulfone hollow fiber membrane and its performance for isopro
An antioxidative composite membrane with the carboxylate group as a fixed carrier for CO2 separation
High performance antioxidative and acid resistant membrane prepared by interfacial polymerization fo
Improvement of CO2/N-2 separation characteristics of polyvinylamine by modifying with ethylenediamin
Performance improvement of polysulfone ultrafiltration membrane using PANiEB as both pore forming ag
High-performance membranes comprising polyaniline nanoparticles incorporated into polyvinylamine mat
Formation-structure-performance correlation of thin film composite membranes prepared by interfacial
Effects of Curing Method on the Gas Separation Performance of Phenolic Resin/Poly(vinyl Alcohol)-Bas
Gas separation performance of C/CMS membranes derived from poly (furfuryl alcohol) (PFA) with differ
Effects of precursor preoxidization on the structure and gas separation properties of polyetherimide
Preparation of C/CMS composite membranes derived from Poly(furfuryl alcohol) polymerized by iodine c
Controlled synthesis of high performance carbon/zeolite T composite membrane materials for gas separ
期刊信息
位置：