欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
为合理控制浸渍时间和提高浸渍质量，在实验室研究的基础上，对中空纤维镍基板的电化学浸渍和特殊电化学浸渍的增重动力学进行了探讨，分析了浸渍过程机制，提出了浸渍过程动力学的三段控速机制，即化学反应．化学反应与扩散混合．扩散控速，并推导出了其数学表达式。用这三段控速的数学表达式，处理了基板增重随浸渍时间变化的实验数据。结果表明：基板浸渍增重规律与三段控速的机制相一致，且改变实验条件，如增加电流密度或浸渍前对基板进行真空预处理，只是提高了浸渍反应速率，缩短了相应的浸渍前期和中期的反应时间。
英文摘要：
To suitably control impregnation time and improve the quality of impregnation, kinetics of weight gain in impregnation process of hollow fibrous nickel plaque were investigated by electrochemical impregnation and special electrochemical impregnation. For the process and the mechanism on reaction rate controlled by three stages was chemical reaction-chemical reaction mixed with diffusion-diffusion was proposed and their mathematical expressions were derived and the experimental data of weight gain with impregnation time were treated by the expressions. From the results the regulaity of weight gain with time coincides with the mechanism on reaction controlled by three stages and changing the experiment conditions such as increasing current density only the reaction rate increases and conespondent impregnation reaction time shortens in initial and middle stages.
同期刊论文项目
同项目期刊论文
The effect of the texture and the density of ZnO seed layer on the orientation of ZnO nanorod arrays
A Simple Two-Parameter Correlation Model for Aqueous Electrolyte Solutions across a Wide Range of Te
A New Three-particle-interaction Model to Correlate the Thermodynamic Properties of Different Electr
Optimization of process parameters of nickel coated on the boron nitride ceramic particles by chemic
Correlation and Prediction of Thermodynamic Properties of Nonaqueous Electrolytes by the Modified TC
位置：