位置:成果数据库 > 期刊 > 期刊详情页
采用Voronoi模型研究多孔金属材料准静态力学特性
  • 期刊名称:工程力学
  • 时间:0
  • 页码:203-209
  • 语言:中文
  • 分类:TB301[一般工业技术—材料科学与工程] TB383[一般工业技术—材料科学与工程]
  • 作者机构:[1]太原理工大学应用力学与生物工程研究所,太原030024, [2]太原理工大学建筑与土木工程学院,太原030024
  • 相关基金:国家自然科学基金项目(90716005 10972153 10802055); 山西省自然科学基金项目(2007021005); 山西省留学回国人员科研项目和山西省青年学术带头人支持项目
  • 相关项目:点阵夹芯结构在爆炸载荷下的塑性动力响应与失效机理研究及其优化设计
中文摘要:

该文采用二维Voronoi随机分布模型研究了"真实"泡沫材料在准静态荷载作用下的力学特性。建立了不同规则度下Voronoi随机分布模型、在相对密度保持不变的情况下改变孔壁不均匀度的模型和在均匀孔壁厚度下删除不同孔壁百分比等三种Voronoi模型。对这三种模型分别进行了准静态荷载作用下的有限元模拟分析。分析结果表明:不同不规则度下Voronoi模型应力-应变曲线不同于规则蜂窝材料的应力-应变曲线且弹性模量均比规则蜂窝多孔材料的弹性模量要大;弹性模量和平台应力随孔壁厚度不均匀度变化先增大后减小;弹性模量和平台应力随着删除百分比的增大逐渐而减小。

英文摘要:

The mechanical properties of 'real' cellular metallic materials under the quasi-static loads are investigated in this paper using of the 2D Voronoi random models.Three kinds of Voronoi random models are modeled as follows: Type Ⅰ with different irregular degrees,TypeII with different inhomogeneous degrees but keeping the same relative density,and Type III with the imperfections of configuration but keeping the same relative density.These three Voronoi random models are analyzed using the finite element method.The analyses results show that the stress-strain curves of different irregular degrees are different from those of honeycomb cellular materials and the elastic modului of the former are bigger than those of the latter.With the inhomogeneous degrees increasing,the elastic modului and Plateau stresses increase firstly and then decrease.With the deletion percentage ratios of cell walls increasing,the elastic modului and Plateau stresses decrease gradually.

同期刊论文项目
同项目期刊论文