欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
利用快重离子辐照的单晶白云母片产生潜径迹,蚀刻得到直径在30—180nm纳米孔道.孔道形状依赖于蚀刻时间,蚀刻时间短得到圆柱形孔道,蚀刻时间长得到菱柱形孔道.从而在云母模板孔道中电化学沉积得到不同直径和形状的Cu纳米线.通过紫外可见光谱分析,发现铜纳米线的尺寸和形状影响其光学性质.直径小于60nm的近似为圆柱状Cu纳米线有一个明显的表面等离子体共振峰和一个微弱的次峰.随着直径增加,菱柱状的Cu纳米线主峰有明显的红移,次峰逐渐增强.同时利用扫描电子显微镜、X射线衍射对Cu纳米线的形貌和晶体结构特征进行了表征.
英文摘要：
Nanopores with diameters between 30 nm and 180 nm have been fabricated by inducing latent track with fast heavy ions and etching process in 25 μm thick,single-crystal muscovite mica.For short etching time,the nanopores are columns with circular cross section.For long etching time the cross section of nanopores becomes rhombic.Thus the shape of nanopores depends on the etching time.Cu nanowires have been fabricated with controlled dimensions by electrodeposition into the nanopores.The ultraviolet-visible light absorption spectra of Cu nanowires embedded in mica templates show that the circular Cu nanowires with diameter smaller than 60 nm exhibit one intense resonance peak and one smaller peak.With increasing diameter of the nanowires,the intense peak is red-shifted while the smaller peak strengthens gradually.The diameter and shape can tune the optical properties of Cu nanowires.The morphology and crystallinity of the Cu nanowires were studied by means of scanning electron microscopy and X-ray diffraction.
同期刊论文项目
同项目期刊论文
Raman spectroscopy of apatite irradiated with swift heavy ions with and without simultaneous exertio
Segmented All-Platinum Nanowires with Controlled Morphology through Manipulation of the Local Electr
Synthesis and magnetic characterization of nickel ferrite nanoparticles prepared by co-precipitation
Electrochemical fabrication of single-crystalline and polycrystalline Au nanowires: the influence of
期刊信息
位置：