中文摘要：

不加入任何表面活性剂、利用溶解-重结晶原理合成了一维结构的Se纳米带，并用XRD，SEM及TEM等方法对产品进行了表征。以单根的硒纳米带为光电响应材料、以银浆为接触电极组装成纳米器件，并对光电响应特性以及光谱响应特性进行了测试。结果表明：在可见光（日光灯）照射下，其对开灯的最快响应时间约为30ms，关灯时最快衰减时间为50ms。该纳米器件的光电流对温度有依赖作用，低温下有利于光电流的产生；单色光的波长对纳米器件的光电流及响应时间的影响不同，在单色光谱响应范围内，纳米器件在650nm处产生的光电流最大，而在350nm处的响应时间最快。

英文摘要：

Se nanobelts with one dimensional structure were synthesized by dissolution-recrystallization principle without any surfactants. The Se nanobelts were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）, etc. The nanodevice was assembled with a single Se nanobelt as photoelectric response materials and silver paste as contact electrodes. The photoelectric response characteristics and spectral response characteristic were tested. The results show that under the irradiation of the visible light （fluorescent lamp）, the fastest respond time is about 30 ms for turning on the light and the fastest attenuation time is 50 ms for turning off the light. The temperature has much effect on the photocurrent of the nanobelt device, the low temperature is in favour of the generation for the photocurrent. The effects of the wavelength of the monochromatic light on the photocurrent and the response time were different. In the monochrome spectral response range, the nanodevice has the largest photocurrent at 650 nm and the fastest response time at 350 nm.